Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

wheel bearings on hilux 1998

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 11
Joined: Tue Aug 03, 2010 6:18 pm

wheel bearings on hilux 1998

Post by mattfromovertheback »

i was just wondering if the replacement or tightening of my hilux's wheel bearings would be hard? ive never done it!
Resident Terrorist
Posts: 4278
Joined: Fri May 21, 2004 9:37 am
Location: Driving Barnsey's mum to bingo

Re: wheel bearings on hilux 1998

Post by RAY185 »

Rear bearings are sealed and not adjustable. They are also a pain in the arse to replace.

Front are adjustable and not too hard to adjust/repack/replace. In either case, buy yourself a workshop manual. Depending on your experience/bravery, you should be fine to do the fronts but might prefer to pay someone to do your rears if needed.
Posts: 11
Joined: Tue Aug 03, 2010 6:18 pm

Re: wheel bearings on hilux 1998

Post by mattfromovertheback »

thanks mate i was fine aye
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest