Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Spare wheel shovel carrier
Moderators: toaddog, TWISTY, V8Patrol, Moderators
Spare wheel shovel carrier
Does anyone know who makes these, thought Kaymar might but apparently not.. TIA
-Miz
-Miz
Four wheels (Driving) good, two wheels bad.
NP Pajero with added goodness..
NP Pajero with added goodness..
Re: Spare wheel shovel carrier
M1S3RY wrote:Does anyone know who makes these, thought Kaymar might but apparently not.. TIA
-Miz
CJ 4wd accessiries in Ferntree gully....
Posts: 1931
Joined: Sun Jun 22, 2003 10:29 am
Joined: Sun Jun 22, 2003 10:29 am
Location: Everything 4WD, 86 Camms Rd Cranbourne
Contact:
Area54 wrote:Available through all ARB outlets, listed in the catalogue, made by Kaymar. Combination High lift and shovel holder.
mmm.... think that'll be the one thats attatched to the roof rack
My club
www.vfwdc.com
My store
Everything 4WD
86 Camms Road Cranbourne
www.everything4wd.com.au
sales@everything4wd.com.au
Phone: 03 59955055
www.vfwdc.com
My store
Everything 4WD
86 Camms Road Cranbourne
www.everything4wd.com.au
sales@everything4wd.com.au
Phone: 03 59955055
Theres a good one if you have a roofrack.
You slide the handle into a spring loaded piece of pipe, then the head slots into a box section, and you can also have a bit of metal that clamps over the shovel head..
Had a rear wheel carrier one, sold it for cheap,
ya dont need 4 tons on the rear door on GQ, the hinges are weak as it is... weight of a 34/36inch tire, rim, spotty, shovel/axe/kitchensink etc etc
YMMV
You slide the handle into a spring loaded piece of pipe, then the head slots into a box section, and you can also have a bit of metal that clamps over the shovel head..
Had a rear wheel carrier one, sold it for cheap,
ya dont need 4 tons on the rear door on GQ, the hinges are weak as it is... weight of a 34/36inch tire, rim, spotty, shovel/axe/kitchensink etc etc
YMMV
Posts: 1931
Joined: Sun Jun 22, 2003 10:29 am
Joined: Sun Jun 22, 2003 10:29 am
Location: Everything 4WD, 86 Camms Rd Cranbourne
Contact:
I wouldn't be putting a high lift jack on the back. Then again I wouldn't bother carying a high lift jack any way.
Mate made me an axe and shovel holder the other week. Cost him about $10 in matterials. Seems to work well. I'll get it powder coated after Easter and put up a pic.
Mate made me an axe and shovel holder the other week. Cost him about $10 in matterials. Seems to work well. I'll get it powder coated after Easter and put up a pic.
My club
www.vfwdc.com
My store
Everything 4WD
86 Camms Road Cranbourne
www.everything4wd.com.au
sales@everything4wd.com.au
Phone: 03 59955055
www.vfwdc.com
My store
Everything 4WD
86 Camms Road Cranbourne
www.everything4wd.com.au
sales@everything4wd.com.au
Phone: 03 59955055
Who is online
Users browsing this forum: No registered users and 4 guests