Fitting TJ Flares to a CJ

Post by **CJer** » Tue Jan 14, 2003 8:58 pm

Had a quick look at this the other day and it looks like a hell of a hard job.
It may of just been the flares i looked at ( 6" dont know the brand) but
if i have to cut the firewall to make them fit then i will stay with the stock CJ ones.

Anybody know of a easier ( and cheep) way of covering my MTR's :?:

Links would be of help too

Post by **Wooders** » Wed Jan 15, 2003 8:10 am

Cut the firewall :?:

Shouldn't have to...You do have to cut a fair bit from the guard - but you shoulcn't need to touch the firewall....

Post by **AussieCJ7** » Thu Jan 16, 2003 9:18 am

The fronts can be a little tricky to get right from what I hear

you dont have to cut the firewall but you do get damn close and I have herd of some people even needing to fold back the seem

do a google search there are heaps of write ups on how to do this

the opther option is YJ fronts and TJ rears or YJ front and rear

There is less cutting needed for the YJ flares and they fitt the front better as they had the same wheel arch pannels as a CJ

Post by **mc4x4** » Thu Jan 16, 2003 12:19 pm

I run tj flares on my cj but i have pit yj guards on as well. The yj guards offer more clearance then the cj.I also had to mod the guards to make them fit
MC

Post by **bj on roids** » Fri Jan 17, 2003 2:50 pm

how common are YJs and are the flares available in AUS?

Post by **AussieCJ7** » Sat Jan 18, 2003 7:33 pm

BJ

in AUS they are like Hens teeth but it is easy enough to order them in and most how stock TJ flares should be able to order yj flares

Post by **mc4x4** » Wed Jan 22, 2003 12:58 pm

I have a spare set of new yj guards and a secondhand set of yj xenon flares.

Post by **CJer** » Wed Jan 22, 2003 9:03 pm

What do you want for them mc 4x4

Post by **mc4x4** » Sat Jan 25, 2003 8:56 am

The guards owe me $780 so thats what i want for them, but the flares $500.
MC

Outer Limits 4x4 Board

Fitting TJ Flares to a CJ

Fitting TJ Flares to a CJ

Who is online