Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Have you seen these mods!

Tech Talk for Mitsubishi owners.

Moderator: -Scott-

Forum rules
Post Reply
Posts: 7
Joined: Sat Jan 18, 2003 7:22 am

Have you seen these mods!

Post by 95Montero »

Check out the mods the Japanese are making....lots of cool pics of diffs broken parts winches...WOW!!
http://www.jsroot.com/kai_root/kai_root.htm
95 Montero LS
Aisin Manual Hubs
32x11.50 BGF AT/KO's
Low Profile Bumps
Flipped Upper Ball Joint
Re Indexed Torsion Bars
Top
Posts: 7
Joined: Sat Jan 18, 2003 7:22 am

More wild Mods

Post by 95Montero »

I had contacted these guys late last year and the lift they offer will fit the Montero i was curious because of the body style differences.

http://www.ultimate-accessories.com/ult ... trada.html
95 Montero LS
Aisin Manual Hubs
32x11.50 BGF AT/KO's
Low Profile Bumps
Flipped Upper Ball Joint
Re Indexed Torsion Bars
Top
Posts: 365
Joined: Thu Oct 24, 2002 1:38 pm
Location: Brisbane, Nthsider

Post by redrocket »

Hey frank is that your mate from japan? he's mad :twisted: , some of the stuff he's done to his car is unbeleivable. He must have way too much time on his hands. I love the vinch in the back - just cut a hole in your back door :P
"If it ain't broken, smash it harder, then make it stronger!"
Top
Posts: 82
Joined: Tue Jan 14, 2003 3:41 pm
Location: Kansas City, USA

Post by Alex Kogan »

Frank,
I noticed them talking about 2.85 low range. Did you supply them with one?
92 Montero SR, 285/75R16(33-11.50/R16) Yokohama MT on 16X8 Eagle 149 alloys, brush guard, Rear ARB, GAST air compressor, AirLift 1000, OME. MileMarker 10500
2002 GL, 285/75R16 SuperSwamper TruXus MT
Top
Posts: 2739
Joined: Sat Oct 26, 2002 7:50 am
Location: Melbourne

Post by Bitsamissin »

Yes Aki is from Japan and he runs that website the club has around 200 members.
We are supplying him a 2.85 t/case gear set and if all goes well we will be doing a 10+ unit order for a VERY good price.
See http://www.outerlimits4x4.com/PHP_Modul ... php?t=1237 for a pic of his rig.
As I said they are right into their rigs and are not scared of chopping the crap out of em and dinging them.
I like the budget sill protection just drill 4 evenly spaced 5mm holes into your sill and pump in some Selleys Stop Gap !!!!!!!!!!!
Top
Post Reply

Return to “Mitsubishi”

Who is online

Users browsing this forum: No registered users and 9 guests