Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

LN106 3L to 2LT

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 2
Joined: Tue Dec 28, 2010 7:06 pm

LN106 3L to 2LT

Post by Deano85 »

Hello, 3L in the hilux has finally packed it in(through no fault of it's own, took in water) and I have a chance to purchase a 2.4turbo. My few questions are.
Are all the pumps on these electronic?
Are the engine mounts and bolt pattern the same?
Any information will be greatly appreciated.
Dean
Posts: 154
Joined: Mon Jul 26, 2010 6:19 pm

Re: LN106 3L to 2LT

Post by monster fj »

if its outer a surf it will be elctronic fuel pump not unless u get a earlyer 1 thats a mecanical pump it will bolt in no wories my sujestion is if its elctric change to a mechanical 1 and thats a bought it
Posts: 1256
Joined: Mon Jun 19, 2006 7:05 pm
Location: newzealand

Re: LN106 3L to 2LT

Post by tweak'e »

it was only the 2lt-e that are electronic. the 2lt(1) and 2lt(2) are both mechanical. 2lt-e has efi written on the cross over tube.

personally i would give the 2.4 a miss unless your just buying it for the turbo gear. stick to the 2.8 ! they are pretty much a straight swap for the 2.8. i think one hang up is aircon if you have. if i remember right hilux has aircon pump in different location.
Posts: 90
Joined: Fri Sep 11, 2009 8:16 pm
Location: Ipswich

Re: LN106 3L to 2LT

Post by BumbleBee »

2LT's are the worst motor ever made by Toyota. Seriously, dont do it! It will crack a head if you sneeze near it. Ring a Desiel mechanic and ask them what they think of 2LT's.
Posts: 154
Joined: Mon Jul 26, 2010 6:19 pm

Re: LN106 3L to 2LT

Post by monster fj »

BumbleBee wrote:2LT's are the worst motor ever made by Toyota. Seriously, dont do it! It will crack a head if you sneeze near it. Ring a Desiel mechanic and ask them what they think of 2LT's.
2lt are not the best but u can put a 2.8 head on a 2.4 2.8 head is a stronger head ask a diesel mec he will tell ya i have a m8 that has had his 2.4 with a 2.8 head 5 years and still running a treat
Posts: 154
Joined: Mon Jul 26, 2010 6:19 pm

Re: LN106 3L to 2LT

Post by monster fj »

tweak'e wrote:it was only the 2lt-e that are electronic. the 2lt(1) and 2lt(2) are both mechanical. 2lt-e has efi written on the cross over tube.

personally i would give the 2.4 a miss unless your just buying it for the turbo gear. stick to the 2.8 ! they are pretty much a straight swap for the 2.8. i think one hang up is aircon if you have. if i remember right hilux has aircon pump in different location.
aircon is in the same position i put the surf 1 on myne bolted strait up its for my endless air :D
Posts: 2
Joined: Tue Dec 28, 2010 7:06 pm

Re: LN106 3L to 2LT

Post by Deano85 »

Cheers guys!
So if i get a 2lt with a mechanical pump the blocks will be the same and it's a direct swap? The 2L head is the weakest link?? I've got the 3L head still so if I get it I'll stick that on, does it go straight on? So which of them had the compressor mounted on the passenger side? Mines on the drivers side.
Cheers!!
Dean
Posts: 2
Joined: Mon Jan 10, 2011 12:28 pm

Re: LN106 3L to 2LT

Post by roderunner »

From my experience, the 2L, and the 2LT don't have many head issues, it seems to be the 2LTE that cracks the head every 6 months. The factory temp gauge on these toyotas are terrible, they sit on the halfway mark while your engines melting down, Im sure that there is a fix for this problem, but I didn't bother, just went out and bought an aftermarket gauge. I would stick with the 3L engine, practically everyone on the toyota surf site switches to the 3l because the 2LTE isn't very powerful, and does have a head cracking problem. From the dyno sheets that I have seen your looking at 40 rear wheel kilowatts from the 2lte, probably around the same as the N.A. 3l.
Post Reply

Who is online

Users browsing this forum: No registered users and 81 guests