who here has put coils under there 45 series and how have you done it??
i picked up a 45 shorty that had range rover suspention connected to the cruiser diffs under it (i didnt get diffs or running gear with it). im thinking of using the range rover suspention but with 60 series diffs.
any other ideas/photos would be of some help.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
coils under a bj shorty
Moderators: toaddog, Elmo, DUDELUX
coils under a bj shorty
there is no such thing as a stupid idea... just a person who owns a rover!!!
Re: coils under a bj shorty
what about 80 series?
they already have coil hats and control arm brackets
they already have coil hats and control arm brackets
standard 93 hilux 2.8D. 33" khumo muds for play
Re: coils under a bj shorty
the easiest by far is to source a complete front and or back of an 80 series and then transfer all the suspension over. just make sure you keep all the arms etc in the same place, angle, separation etc.
Many thanks to Buds Customs, for all their ongoing support
Call Buddy on 0417 708 598 for all your custom and off the shelf parts, fabrication, and installation
Call Buddy on 0417 708 598 for all your custom and off the shelf parts, fabrication, and installation
Re: coils under a bj shorty
don't mean to hijack,
but what about bundera?? ive just found a bundy for sale at a fair price ($1000) is this any better or worse??
cheers
loose
but what about bundera?? ive just found a bundy for sale at a fair price ($1000) is this any better or worse??
cheers
loose
" You can't fix it if you don't break it "
Sorry to be a stickler but is it a BJ shorty or a 45? As far as I know, there was no bj45 (four cyl diesel LWB) brought into this country?
If it's a LWB, consider buying a rolling chassis from an 80 and chucking the body on top of that. I'm about halfway through doing this with my 45 ute at the moment. There's a few fiddly bits like sorting the radiator mounting and moving the gearbox crossmember forward and farking with the steering but it's really not too hard at all and you get a newer (and IMO stronger) chassis, a decent 112"wb, more track width, better brakes, better suspension, yet still get to keep the coolness of the 45. Win/win in my book.
If it's a SWB then you may have to go all custom. I'm pretty sure Scotto did this with his, here's his build thread on another forum:
http://www.3rdrock4x4.com/forum/viewtop ... c&start=25" onclick="window.open(this.href);return false;
And on here:
http://carl.outerlimits4x4.com/viewtopi ... 16&t=24472" onclick="window.open(this.href);return false;
That's with 80s diffs by the way.
I reckon the Rangie suspension could work very well if you stretched your wb out to 100" or so. They have one of the more flexible radius arm setups in the front and the A-arm in the rear is very decent too. But whichever way you go, you're going to have to be handy with the welder and grinder.
If it's a LWB, consider buying a rolling chassis from an 80 and chucking the body on top of that. I'm about halfway through doing this with my 45 ute at the moment. There's a few fiddly bits like sorting the radiator mounting and moving the gearbox crossmember forward and farking with the steering but it's really not too hard at all and you get a newer (and IMO stronger) chassis, a decent 112"wb, more track width, better brakes, better suspension, yet still get to keep the coolness of the 45. Win/win in my book.
If it's a SWB then you may have to go all custom. I'm pretty sure Scotto did this with his, here's his build thread on another forum:
http://www.3rdrock4x4.com/forum/viewtop ... c&start=25" onclick="window.open(this.href);return false;
And on here:
http://carl.outerlimits4x4.com/viewtopi ... 16&t=24472" onclick="window.open(this.href);return false;
That's with 80s diffs by the way.
I reckon the Rangie suspension could work very well if you stretched your wb out to 100" or so. They have one of the more flexible radius arm setups in the front and the A-arm in the rear is very decent too. But whichever way you go, you're going to have to be handy with the welder and grinder.
|^^^^^^^^^^^^^^| ||
|.........SUZUKI..........| ||'|";, ____.
|_..._..._______===|=||_|__|..., ]
(@)'(@)"""''"**|(@)(@)*****''(@)
|.........SUZUKI..........| ||'|";, ____.
|_..._..._______===|=||_|__|..., ]
(@)'(@)"""''"**|(@)(@)*****''(@)
Who is online
Users browsing this forum: No registered users and 28 guests