Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Truck stacks on your 70 series

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 1
Joined: Fri Sep 10, 2010 4:06 pm

Truck stacks on your 70 series

Post by MORGAN »

hey guys new to site loving it lots of cool rigs on here just curious to see how many people are running stack setup post some pics .
Posts: 82
Joined: Tue Mar 27, 2007 4:34 pm
Location: Wilton

Re: Truck stacks on your 70 series

Post by TURBO60 »

Image
Image
Image
Twin 3 inch Stainless straight through
the bage ute is 2.5 inch " "
hj75 2h turbo intercooled twin locked longfields 35s
Posts: 352
Joined: Sun Aug 30, 2009 1:00 pm
Location: Australia

Re: Truck stacks on your 70 series

Post by GO79 »

That would give some serious truck sound
Posts: 29
Joined: Mon Mar 15, 2010 6:02 pm
Location: forster

Re: Truck stacks on your 70 series

Post by tezza88 »

stacks look good, but it depend wot sort of driving you want to do. i considered stacks for my 79 series, but after sum thought worked out that they wouldn't last very long in the bush,... i have clearance issues as it is and i would simply rip them off same as driving lights on the rear bar, already torn off a snorkel and snapped plenty of arials.
'stacks are fine in open 4wd situations, just not in dense bush
79 series cruiser, 6" susp., 3' body lift, rear coil conversion, 35" baja claws... fully engineered and lockers on the way
Posts: 261
Joined: Sat Feb 20, 2010 11:41 pm
Location: Katherine NT

Re: Truck stacks on your 70 series

Post by supazuk »

stacks are for ricers ;)
Posts: 51
Joined: Sun May 21, 2006 3:25 pm
Location: Ipswich

Re: Truck stacks on your 70 series

Post by buddah_04 »

i was thinking about putting stacks on my 75 series ute, but i have been told with the 4l 2h, it may also loose some power and torque. Is this correct?
Posts: 3038
Joined: Thu Aug 05, 2004 10:06 pm
Location: VIC

Re: Truck stacks on your 70 series

Post by dogbreath_48 »

buddah_04 wrote:i was thinking about putting stacks on my 75 series ute, but i have been told with the 4l 2h, it may also loose some power and torque. Is this correct?
If the engine pipe remains around 2.25-2.5" then i can't see it making any difference.

I ran extractors on a 2H which killed the low down torque but did seem to let it rev a little more freely (a mute point given 2H's don't make any power up there anyway)
Tetanus rolling on 37's
Posts: 184
Joined: Mon May 21, 2007 10:15 am
Location: floatin around

Re: Truck stacks on your 70 series

Post by 302 cruiser »

y would you want to do that :cool:
Posts: 19
Joined: Tue Jan 11, 2011 10:08 pm

Re: Truck stacks on your 70 series

Post by 96cruiserute »

im also thinking about putting twin stacks on my 75 with a 1hz.
Just wondering how other people have done theres i have heard of people moving their tray back or cutting wholes in the tray. Whats the best way?
Im here for the sausage!
Posts: 15646
Joined: Wed Sep 24, 2003 7:11 pm
Location: NEWCASTLE

Re: Truck stacks on your 70 series

Post by DIRTY ROCK STAR »

supazuk wrote:stacks are for ricers ;)
baby jesus cries everytime a stack is put on a landcruiser.
EVERYONE LOVES A 40
www.lovells.com.au
RAW4x4
Posts: 19
Joined: Tue Jan 11, 2011 10:08 pm

Re: Truck stacks on your 70 series

Post by 96cruiserute »

cries of happyness that is.
Posts: 3224
Joined: Thu Apr 15, 2004 9:36 pm
Location: Lost in the Cleland fog!

Re: Truck stacks on your 70 series

Post by ferrit »

my work truck used to have a stack.. drove me NUTS driving it- its loud and the rainflap rattled.

Image

You can just see the stack above the passenger side.
2005 HDJ100 Manual, ARB bar, XD9000 winch, ARB rooftop tent + awning, Drawers, Engel, 2" OME lift, 285/75R16 KM2's, iCom, HID XGT's.
Posts: 4
Joined: Tue May 12, 2009 5:31 pm
Location: Maleny

Re: Truck stacks on your 70 series

Post by Marty25 »

My 79 HDJ 3.5" dump into 3" then 2 4" stacks behind the cab, 3" lift, with custom 5 poster winch bar that i've made, warn XD9000 fitted front and rear lockers going in next week then building a new tray for it

Image
Posts: 19
Joined: Tue Jan 11, 2011 10:08 pm

Re: Truck stacks on your 70 series

Post by 96cruiserute »

mate that 79 look amazing. how did you get the stacks to fit? I'm really thinking about doing a similar stack setup. so any information of yours would be helpfull.
any pros and cons about them?
Road Ranger
Posts: 10722
Joined: Fri Nov 12, 2004 12:21 pm
Location: In a town near you

Re: Truck stacks on your 70 series

Post by Tiny »

If you want stacks buy a REAL truck :finger:
If the above post did not offend you in any way please PM me so I can try harder!!
Posts: 441
Joined: Sun Nov 07, 2004 2:25 pm
Location: Rockhampton

Re: Truck stacks on your 70 series

Post by hj 45 »

Jesus christ thaat's a huge bullbar...... :?
Posts: 184
Joined: Mon May 21, 2007 10:15 am
Location: floatin around

Re: Truck stacks on your 70 series

Post by 302 cruiser »

mate that 79 look amazing. how did you get the stacks to fit? I'm really thinking about doing a similar stack setup. so any information of yours would be helpfull.

that is the ugliest cruiser i have ever seen
Posts: 19
Joined: Tue Jan 11, 2011 10:08 pm

Re: Truck stacks on your 70 series

Post by 96cruiserute »

mate if you have nothing nice to say, why say anything. sure people have their opinion but if you wanna talk sh*t go talk somewhere else
Road Ranger
Posts: 10722
Joined: Fri Nov 12, 2004 12:21 pm
Location: In a town near you

Re: Truck stacks on your 70 series

Post by Tiny »

96cruiserute wrote:mate if you have nothing nice to say, why say anything. sure people have their opinion but if you wanna talk sh*t go talk somewhere else
Sounds like someone needs a hug...... Pm drs :twisted:
If the above post did not offend you in any way please PM me so I can try harder!!
Posts: 4
Joined: Tue May 12, 2009 5:31 pm
Location: Maleny

Re: Truck stacks on your 70 series

Post by Marty25 »

i moved the tray back 6" so they had room to bugger around in there fitting them, i haven't moved it back yet as i'm building a new tray soon, ha yeah the bars not finished yet still need to put spottie and arial mounts on yet then get it powdercoated(that is just a quick prime and spay as i just finished it before a cruiser park trip)
Posts: 4
Joined: Tue May 12, 2009 5:31 pm
Location: Maleny

Re: Truck stacks on your 70 series

Post by Marty25 »

96cruiserute wrote:mate that 79 look amazing. how did you get the stacks to fit? I'm really thinking about doing a similar stack setup. so any information of yours would be helpfull.
any pros and cons about them?

Pros: sounds Amazing!!!!!
Cons: Rain

The pipe work to behind the cab is all bolt on the only section that was made up is the "y" piece that feeds the stacks
Posts: 48
Joined: Sun Jan 21, 2007 12:22 pm
Location: Woodford QLD

Re: Truck stacks on your 70 series

Post by cozzav8 »

Marty25 wrote:
96cruiserute wrote:mate that 79 look amazing. how did you get the stacks to fit? I'm really thinking about doing a similar stack setup. so any information of yours would be helpfull.
any pros and cons about them?

Pros: sounds Amazing!!!!!
Cons: Rain

The pipe work to behind the cab is all bolt on the only section that was made up is the "y" piece that feeds the stacks
x2 With the rain, mine used to blow soot all over my toolboxes when it rained
79 Series RV, 305 Mickey T's, 2" OME, 3" into twin 4" stacks, LOL, Love it
Posts: 13
Joined: Tue Oct 20, 2009 8:05 am
Location: Bowen, Nrth QLD

Re: Truck stacks on your 70 series

Post by Hillery »

[quote="buddah_04"]i was thinking about putting stacks on my 75 series ute, but i have been told with the 4l 2h, it may also loose some power and torque. Is this correct?[/quote]


the 2h doesnt have much to start with, mainly you loose power if the pipe is to large, also have been told they work better as a straight through as there is no restrictions and it allows it to push air out and up quiker? is that tru


where can you buy the heat shield and flaps for top for em like on the trucks?
just thinking of putting one on my 47 ute :finger:
cheers
Posts: 82
Joined: Tue Mar 27, 2007 4:34 pm
Location: Wilton

Re: Truck stacks on your 70 series

Post by TURBO60 »

you can get the rain caps off ebay or try a truck spares shop
hj75 2h turbo intercooled twin locked longfields 35s
Posts: 13
Joined: Tue Oct 20, 2009 8:05 am
Location: Bowen, Nrth QLD

Re: Truck stacks on your 70 series

Post by Hillery »

cheers mate, you reckon 2 1/2 inch pipe would be ok?
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests