Custom hawse fairlead

[AFeral]

Widened the drum on my warn high mount now need suitable hawse fairlead. Who does custom one's ?
Feral

[sprungupcruiser]

Could you not get something laser cut or machined? probably cheaper I would think.

[AFeral]

Laser cutting would not work as corners of the rope slot need chamfered. Yes I could get someone to machine one how many $$$ though. Thought I would ask her first if someone already has their CNC machine programed would be fairly easy to change a few measurements and work from there. Rather than programing from scratch.

[DamTriton]

It wouldn't take long to manually file the aperture from a laser cut blank

[tuf045]

router on router table to make the chamfer is how i have seen it done

[bru21]

I made mine out of 44mm steel elbows, and 2 short lengths of pipe- and intergrated it into the bar. Worked very well and was kind on the rope due to the bigger radius

[hokey]

i've seen on a few cars around my area what seems to be some steel rod bent around the hole and welded on. would be fairly simple to do i'd imagine

[Zuri92]

do what these 2 guys said, easy, cheap, and exactly what you require.

[pigletracing]

done it a few times by welding 2 U bolts (large leaf spring ones) together, smoothing them up, then weld them over the hole.
but make sure you get rid of all the sharp edges !!!

cheers "PIGGY"

[Modified Toy]

Use some small steam pipe mandral bends and weld them up to your hole size ,clean up what you can with a grinder and file the rest.

[Roctoy]

I'm about to CNC router cut a heap of Hawse Fairleads in the next few weeks from a composite plastic material. Lighter and stronger than aluminium, with none of the friction heat issues caused by running rope through them at high speeds. They will have a smooth radius edge around the rope slot and recessed mounting bolt holes. As you can see there are already a heap of different options for vehicle logos etc. It wouldn't be a problem to do team names either for a small additional fee.
I haven't finalised prices for them yet, but i will be able to do custom sizes and designs to suit different winch setups.

Stay tuned

cheers Chris

[ISUZUROVER]

I'm about to CNC router cut a heap of Hawse Fairleads in the next few weeks from a composite plastic material. Lighter and stronger than aluminium, with none of the friction heat issues caused by running rope through them at high speeds. They will have a smooth radius edge around the rope slot and recessed mounting bolt holes. As you can see there are already a heap of different options for vehicle logos etc. It wouldn't be a problem to do team names either for a small additional fee.
I haven't finalised prices for them yet, but i will be able to do custom sizes and designs to suit different winch setups.

Stay tuned

cheers Chris

How can they be lower friction - unless you are using glass reinforced teflon???

I note you don't have any variants with offset mounting holes???

Colours? Rough price difference to a stock al item?

[Roctoy]

They are not lower friction, they just disipate the heat better than aluminium does. They are cut from Black HDPE engineering plastic.

The standard ones are the same mounting hole offset as every other hawse fairlead about 250mm approx, but this can be changed to suit whatever is needed, for different drum widths etc.

They will be a similar price to the aluminum ones on the market already, i will try to keep them as cheap as i can.

Note they are not a new idea, just no one makes them in Australia.
Here's a review from Pirate in 2003 on a similar product.
http://www.pirate4x4.com/tech/billavist ... index.html

Cheers Chris

[V.W.Dave]

They are not lower friction, they just disipate the heat better than aluminium does. They are cut from Black HDPE engineering plastic.

The standard ones are the same mounting hole offset as every other hawse fairlead about 250mm approx, but this can be changed to suit whatever is needed, for different drum widths etc.

They will be a similar price to the aluminum ones on the market already, i will try to keep them as cheap as i can.

Note they are not a new idea, just no one makes them in Australia.
Here's a review from Pirate in 2003 on a similar product.
http://www.pirate4x4.com/tech/billavist ... index.html

Cheers Chris

Well hurry up I need one and will be happy to pay you over arb or tjm for one.
Let me know when to send the money.

[SIM79]

I'm about to CNC router cut a heap of Hawse Fairleads in the next few weeks from a composite plastic material. Lighter and stronger than aluminium, with none of the friction heat issues caused by running rope through them at high speeds. They will have a smooth radius edge around the rope slot and recessed mounting bolt holes. As you can see there are already a heap of different options for vehicle logos etc. It wouldn't be a problem to do team names either for a small additional fee.
I haven't finalised prices for them yet, but i will be able to do custom sizes and designs to suit different winch setups.

Stay tuned

cheers Chris

Have the prices been sorted out?

[Jcas24]

Nice, look forward to hearing more about these

[Roctoy]

i have confirmed prices, but i am now looking at a slightly different way of manufacturing them.

[Roctoy]

got the first batch yesterday!

they turned out really nice.


check the misc for sale section i've got heaps of stuff for sale in there atm, including these.

[GUtripper]

http://gigglepin4x4-shop.co.uk/epages/e ... airlead%22" onclick="window.open(this.href);return false;

http://gigglepin4x4-shop.co.uk/epages/e ... cts/G72003" onclick="window.open(this.href);return false;

[Roctoy]

hmmmm gigglepin stuff is sexy!

[GUtripper]

Not to mention exxy...... but good.

[SIM79]

got the first batch yesterday!

they turned out really nice.

Looks good

[ISUZUROVER]

They are not lower friction, they just disipate the heat better than aluminium does. They are cut from Black HDPE engineering plastic.

They look nice.

However I don't see how you can claim they dissipate heat better than Al.

Al has a thermal conductivity of ~250 W/m.K at 25oC. HDPE is ~0.6 W/m.K at the same temp.

So the Al should dissipate heat about 300x faster than HDPE (for the same area).

Even special $$$ plastics designed to be used as heatsinks only get up to around 100-150 W/m.K

EDIT
By offset I meant this type:

[Roctoy]

They are not lower friction, they just disipate the heat better than aluminium does. They are cut from Black HDPE engineering plastic.

They look nice.

However I don't see how you can claim they dissipate heat better than Al.

Al has a thermal conductivity of ~250 W/m.K at 25oC. HDPE is ~0.6 W/m.K at the same temp.

So the Al should dissipate heat about 300x faster than HDPE (for the same area).

Even special $$$ plastics designed to be used as heatsinks only get up to around 100-150 W/m.K

EDIT
By offset I meant this type:

hmmmm i've just checked your figures and they are close enough to being true, your engineers status has been renewed for another 12 months
That'll teach me for making claims based on someone elses similar product overseas. Rock Buggy Supply in the USA do these and they've been given hell by Pirate4x4 and survived well.

Be that as it may, is there a way you calculate accurately how quickly a material builds up heat from friction in the first place? My personal experience machining this stuff is that it just doesn't get as hot as aluminium (i end up with the bits of offcuts in my boots sometimes and it's just scratchy, but when maching ally in tha same way it friggin burns!) simple example. I would think that running synthetic rope through it would be the same. The coefficient of friction, kinetic, for the HDPE that these are made from is 0.22. How does this compare to aluminium? ( I am by no means a metallurgist? )

All good and well, theres a few of them in the field now and i'd appreciate any feedback positive or negative. I'm just giving something a shot, if it works it works.

As for the offset ones, yes i am getting some of them cut in the near future, just want to see how the first lot work out.

Chris

[ISUZUROVER]

They are not lower friction, they just disipate the heat better than aluminium does. They are cut from Black HDPE engineering plastic.

They look nice.

However I don't see how you can claim they dissipate heat better than Al.

Al has a thermal conductivity of ~250 W/m.K at 25oC. HDPE is ~0.6 W/m.K at the same temp.

So the Al should dissipate heat about 300x faster than HDPE (for the same area).

Even special $$$ plastics designed to be used as heatsinks only get up to around 100-150 W/m.K

EDIT
By offset I meant this type:

hmmmm i've just checked your figures and they are close enough to being true, your engineers status has been renewed for another 12 months
That'll teach me for making claims based on someone elses similar product overseas. Rock Buggy Supply in the USA do these and they've been given hell by Pirate4x4 and survived well.

Be that as it may, is there a way you calculate accurately how quickly a material builds up heat from friction in the first place? My personal experience machining this stuff is that it just doesn't get as hot as aluminium (i end up with the bits of offcuts in my boots sometimes and it's just scratchy, but when maching ally in tha same way it friggin burns!) simple example. I would think that running synthetic rope through it would be the same. The coefficient of friction, kinetic, for the HDPE that these are made from is 0.22. How does this compare to aluminium? ( I am by no means a metallurgist? )

All good and well, theres a few of them in the field now and i'd appreciate any feedback positive or negative. I'm just giving something a shot, if it works it works.

As for the offset ones, yes i am getting some of them cut in the near future, just want to see how the first lot work out.

Chris

HDPE => steel has a friction coefficient of ~0.2
vs
AL => steel of ~0.5 (possibly shlightly lower if highly polished).

So the HDPE does have a friction advantage. (however not enough to outweigh the reduced conductivity).

I suspect the reason the swarf is cooler is (a) it takes less energy to remove it and (b) the plastic is less able to absorb heat from the machine tool during the time it is in contact with it.

[Roctoy]

righto then i might have to change the wording on my marketing. you've got to admit though, less friction = less heat, i was on the right track

cheers

[ISUZUROVER]

righto then i might have to change the wording on my marketing. you've got to admit though, less friction = less heat, i was on the right track

cheers

maybe...

Coefficients of friction (COF) are tested against steel, but the friction of UHMWPE (the winch rope) on Al or HDPE may not be directly correlated with the COF of Al on steel or HDPE on steel.

However, if they are: Then the Al will generate more heat, but be able to "wick" it away faster to the rest of the Al. If the cable is sitting in one spot on the fairlead, I doubt HDPE could have an advantage, but if it is moving (e.g. side-side) across the fairlead then the cable temp may stay lower.

How much would it cost to make some in glass reinforced PTFE??? It has a COF of 0.05 If the price was reasonable I would be up for one.