hi all,
how do you remove the rear near side shock from a lj70. i can see that its a loop to pin but it looks like a weld nut at the top?
its an 1989 lj71g
thank you.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
how to remove a LJ70 rear shock
Moderators: toaddog, Elmo, DUDELUX
Re: how to remove a LJ70 rear shock
I think you can remove the entire plate that the shock bolts to at the top (three bolts) from the car and then undo the shock, makes it a lot easier. Thats what my old RJ70 was like, did it about 8 years ago though, so I may be mistaken
Re: how to remove a LJ70 rear shock
i went out and took an other look and your right it was well hidden but i got it out in the end. thank you.drr wrote:I think you can remove the entire plate that the shock bolts to at the top (three bolts) from the car and then undo the shock, makes it a lot easier. Thats what my old RJ70 was like, did it about 8 years ago though, so I may be mistaken
it was hard to tell as the owner before me had heavily under coated everything not easy to spot
Who is online
Users browsing this forum: No registered users and 3 guests