Need to put harnesses in the Nav, but not sure what the go is with the Taxi bars? What have people done in dualcabs without internal cages? Mounts/design etc...
Any help greatly appreciated.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Taxi Bars and Harness mounts
Moderators: toaddog, TWISTY, V8Patrol, Moderators
Taxi Bars and Harness mounts
D22 Navara....hydro coilovers, hydro steer, 42's...
76 Landcruiser tow rig
76 Landcruiser tow rig
Re: Taxi Bars and Harness mounts
bit more searching i found this
http://www.ccda4wd.com.au/images/Rollov ... 060428.pdf" onclick="window.open(this.href);return false;
So the taxibar main hoop for the ute cage, does it still need backstays or front stays? makes it look like i need to build an internal cage just for the harness mounts?
http://www.ccda4wd.com.au/images/Rollov ... 060428.pdf" onclick="window.open(this.href);return false;
So the taxibar main hoop for the ute cage, does it still need backstays or front stays? makes it look like i need to build an internal cage just for the harness mounts?
D22 Navara....hydro coilovers, hydro steer, 42's...
76 Landcruiser tow rig
76 Landcruiser tow rig
Re: Taxi Bars and Harness mounts
im pretty sure ive seen them sandwhich plated on the floor
Like a bar with 2x 90 degree bends at either end welded onto a piece say 100x100x5 and a piece of 100x100x5 on the bottom side of the floor with bolts holding the 2 pieces together
NOTE:the sizes are examples only
Like a bar with 2x 90 degree bends at either end welded onto a piece say 100x100x5 and a piece of 100x100x5 on the bottom side of the floor with bolts holding the 2 pieces together
NOTE:the sizes are examples only
DIRTY ROCK STAR wrote: im going to google a borneo sucker fish.
sounds like the code name for dudelux when he cross dresses and smokes pencil.
Who is online
Users browsing this forum: No registered users and 1 guest