hey guys sorry to be a pain, can some1 please tell me the steps in installing a oil pressure gauge, i have a 1992 hilux rn105. just wondering where the oil pressure switch would go etc.
even a link to a helpful site would b muchly appriecated.
thanks guys.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
oil pressure gauge
Moderators: toaddog, Elmo, DUDELUX
oil pressure gauge
92 hilux 3 inch efs lift 2 inch body lift 33 inch mickey t's:)
Re: oil pressure gauge
You need to locate your factory oil pressure sensor, and then either get rid of the factory sender, and install your aftermarket sender in its place, or the better option is to get a T Piece so you can have both guages running.
If its a mechanical guage, you will just have a capiliary tube rinn ing into the back of the guage, same deal, need to locate factory sender, T piece, done.
If its a mechanical guage, you will just have a capiliary tube rinn ing into the back of the guage, same deal, need to locate factory sender, T piece, done.
03 HDJ100R GXL / 94 FJ45-80
Who is online
Users browsing this forum: No registered users and 5 guests