Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

wheel spacers.

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 398
Joined: Fri Oct 25, 2002 5:40 am
Location: near gosford,central coast, nsw

wheel spacers.

Post by cplux »

Just wondering opinions on using aluminium wheel spacers.

cheers
Top
Posts: 4275
Joined: Thu Dec 19, 2002 2:12 pm
Location: Sydney

Post by ozy1 »

ally wheel spacers, from what i believe, and heard of, was they were comming loose, as the alloyheats up and cools down at a quicker rate than the disk brake and all, causing a rapid expansion and shrinkage, youd be better off with a material with similar properties to that of its mounting points.

but if its only gunna be used off road, then i dont see many dramas....

thats all what i have heard
Top
Posts: 2136
Joined: Mon Dec 01, 2003 6:36 pm
Location: Lake Macquarie

Re: wheel spacers.

Post by 4sum4 »

cplux wrote:Just wondering opinions on using aluminium wheel spacers.

cheers
Just make them out of steel its about $4 an inch plus studs ect

and chek your PM for a differant topic cheers...
[url=http://downunder4x4.net/forum/showthread.php?t=1650]86 Hilux[/url]
and a 84 extra cab



If Rocks Had P^ssies Our Lives Would Be Perfect :D...
Top
Posts: 1361
Joined: Thu Oct 24, 2002 8:47 pm
Location: Now in a happy place.

Post by Cheezy4x4 »

Dont run any, get your wheels offset. ;)
NOW ABLE TOO SAY WHAT I WANT WITHOUT FEAR OF LOOSING SALES.
The person who says it cannot be done should not interrupt the person doing it.
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 4 guests