Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Oil leak, probably rear main seal?

Tech Talk for Mitsubishi owners.

Moderator: -Scott-

Post Reply
User avatar
pjb
Posts: 103
Joined: Thu Sep 24, 2009 8:59 am
Location: North Shore City, New Zealand

Oil leak, probably rear main seal?

Post by pjb »

Folks,
I've got a leak out bottom of the bellhousing on my 3.5 pajero. Presume this is probably rear main seal? It's a steady drip when the vehicle is running, and does seem to be getting worse... Does keep the underside of the truck quite rust-free though!

I'm getting a little tired of topping up the oil. So, how bad is it to change this seal? Gbox out? Engine out?

Cheers,
Paul
94 NJ SWB, 3.5 V6, Auto, susp+body lift, 33x12.6 Maxxis Bighorns, AISIN hubs, ARB bar + tigerz11 2-speed winch, sliders, ARB and factory lockers.
Posts: 511
Joined: Tue Jan 15, 2008 1:33 pm
Location: Cooma NSW

Re: Oil leak, probably rear main seal?

Post by date »

Is the oil black, or at least the same colour as the engine? The reason for asking is that it could also be from the gearbox. By the fact that you are having to top up the engine, it probably is engine oil.

Another place for oil leaks is the rear of the tappet covers. I had a leak for the R side, and it took forever to find it. It was dripping down onto the exhaust and therefore not mucking the underside very much. When I did, it was so obvious, and very easy to fix - a 10 mm spanner, 2 bolts and the end cap slides out. New O ring and put it all back together.
Posts: 33
Joined: Sat Jan 08, 2011 7:09 pm

Re: Oil leak, probably rear main seal?

Post by DRides »

if it is the rear main then yes, its gear box out.
when you do this, leave your torque converter in your gear box (unbolt it off the ring gear b4 u remove the box)
Love That TRUCK!
Post Reply

Who is online

Users browsing this forum: No registered users and 5 guests