Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Rear diff FZJ75 1996 rear disc - compatible diffs??

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 438
Joined: Thu Jun 24, 2004 4:58 pm
Location: wollongong

Rear diff FZJ75 1996 rear disc - compatible diffs??

Post by Stackson45 »

Howdy,

I've recently sheared the axle studs on the drivers side, the axle starting coming out while driving, and has worn a groove into the axle, and more than likely may have worn the stub axle.

So i need a DS axle, the hub i can replace the studs and get the dowels machined out one size bigger, and (i'll know when i pull it apart) possibly the DS stub axle.

Being rear disc, what parts of other models- either older 75/40's, or maybe 80 rears are compatible with mine?

Cheers,
Rob
Landcruiser UTE 1996 FZJ75 - SPOA, 35"s,
extended chassis, poor mans extra cab, 4.56 diff gears, Lockright front, chinese air locker rear...
Top
Posts: 438
Joined: Thu Jun 24, 2004 4:58 pm
Location: wollongong

Re: Rear diff FZJ75 1996 rear disc - compatible diffs??

Post by Stackson45 »

Also would someone have the axle lengths for the short side axle for 60's and 40's? i can then measure mine / check spline count and have a better idea what to look for.

Any info would be great.

Cheers,
Rob
Landcruiser UTE 1996 FZJ75 - SPOA, 35"s,
extended chassis, poor mans extra cab, 4.56 diff gears, Lockright front, chinese air locker rear...
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 55 guests