Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

GQ/GU coil front end chassis differences

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 443
Joined: Tue Oct 12, 2004 10:45 am
Location: Sailsbury-Brisbania

GQ/GU coil front end chassis differences

Post by JrZook »

Hi

Don't know too much bout these big beasts but are the front ends of the chassis from the radius arm mount forward the same in terms of shock, arm, spring, panard and steering component mounting points?

The reason I ask is that Im part of a scouting group here in Brisbane and we have suffered front end damage to our bash car and are looking for a chassis cut to repair it. We run a GQ coil front end with MQ/MK rear leaf end. At a glance the GQ/GU fronts seem the same.

Also would anyone be able to point us in a good direction to look for or find a GQ/GU chassis with a straight front that we could cut and use in our bash car. Even more specifically we require a straight passenger side chassis rail cut from behind the radius arm mounting point to the front.

Any help would be greatly appreciated

Regards Dan
Posts: 4494
Joined: Mon Nov 25, 2002 9:51 pm
Location: Golden Square

Re: GQ/GU coil front end chassis differences

Post by turps »

Pretty much the same. Front axle is just slighty wider.
Might as well go GQ as there cheap as cheaps from the wreckers or better yet I am sure a heap got written off after the floods. So check the auctions.
THOUGHT FOR THE DAY....
Posts: 4225
Joined: Tue Jun 17, 2003 8:58 pm
Location: sunshine coast australia

Re: GQ/GU coil front end chassis differences

Post by mud4b »

Im not sure on model (think its gu series 2 and up) but the front panhard changed to a bearing type and i think the mount is different. i have chassis cuts here for $150 if you get stuck.

cheers mark.
Mud4b/ OPT, Cheap rates, Not cheap work. Search Opt- option offroad on facebook. Call or Sms 0439609525.. Sunshine coast, Eudlo, 4554.
Posts: 443
Joined: Tue Oct 12, 2004 10:45 am
Location: Sailsbury-Brisbania

Re: GQ/GU coil front end chassis differences

Post by JrZook »

Thanks guys!\

Think I have tracked one down hopefully, will see how it goes. I too thought that there would be a few around anyway and as well after the floods but not as easy to find as I would have imagined!

Thanks for the offer mark, will keep it in mind! Do you have many patrol parts around? Where abouts are you, still at sunny coast?

Cheers Dan
Posts: 4494
Joined: Mon Nov 25, 2002 9:51 pm
Location: Golden Square

Re: GQ/GU coil front end chassis differences

Post by turps »

JrZook wrote:Thanks guys!\

Think I have tracked one down hopefully, will see how it goes. I too thought that there would be a few around anyway and as well after the floods but not as easy to find as I would have imagined!

Thanks for the offer mark, will keep it in mind! Do you have many patrol parts around? Where abouts are you, still at sunny coast?

Cheers Dan
Can some times take awhile for the insurance companys to release them for auction.
THOUGHT FOR THE DAY....
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest