Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
12HT 75 ute
Moderators: toaddog, Elmo, DUDELUX
Re: 12HT 75 ute ( front diff bulletproofing)
i broke 1 cv ages ago (looked ugly anyway) and while pulling my 15 ton of truck and bobcat out of my paddock after rain i done the new cv and crownwheel, dont know how i bent the housing (right next to the knuckle) i know how much curry you give yours. Strange hey. i might of not set the centre up properly when i put the detroit in. Usually the older hj diffs are stonger than the hzj ones.
oh yeah and it was not your everyday recovery, took 40 mins of curry and abuse before i blew the cv and then about 5 pulls later i done the crownwheel.
oh yeah and it was not your everyday recovery, took 40 mins of curry and abuse before i blew the cv and then about 5 pulls later i done the crownwheel.
Re: 12HT 75 ute ( front diff bulletproofing)
hey mate nice build, my mate cameron has a hj75 with a 12ht and 79 series bonnet from frp, his is beige though, that would be an interesting drag hey? he lives in morayfield, he also fitted the vacuum boosted clutch master and everything, and kept the vaccuum selected transfer so its push button he would loooove to see your truck up close, he would cream his pants
Me + Landcruiser = Instant entertainment
if you just add RUM!!
if you just add RUM!!
Re: 12HT 75 ute going to photoshoot for 4wd action custom ut
Thats along the lines of what my front setup is now, has given me now trouble in both cars I have run it in.chris12ht75 wrote:ok after breaking 8 teeth off my front crown wheel, busting 2 cv's and bending the housing i have decided to do something with my front diff. I bought another complete hj75 diff and have stripped it out and right now the housing is sitting at superior engineering getting all the fruit done to it. Should be staunch when i get it back. Also got some longfields so there is my cv problem fixed and i'm doing away with the detroit and going to an air locker. Superior is also hooking me up with there heavy duty swivel hub kit .Should be almost bulletproof i reckon
i'll post some pics of it when i get the housing back
The Silver Bullet - BJ74
Where the actions at Ontrack 4wd Club
http://www.ontrack4wdclub.com/
[url]http://www.cams.com.au/[/url]
Where the actions at Ontrack 4wd Club
http://www.ontrack4wdclub.com/
[url]http://www.cams.com.au/[/url]
Re: 12HT 75 ute ( front diff bulletproofing)
yeah if i didn't have the detroit i would not have broken them i don't think as i would of had them unlucked instead of all 4 wheels loading right up at the end of the snatch. Is your's a arb or tjm locker Hulsty?
Re: 12HT 75 ute ( front diff bulletproofing)
Yeah for sure mate, come round for a beer. I'm at Bellmere.dexter09 wrote:hey mate nice build, my mate cameron has a hj75 with a 12ht and 79 series bonnet from frp, his is beige though, that would be an interesting drag hey? he lives in morayfield, he also fitted the vacuum boosted clutch master and everything, and kept the vaccuum selected transfer so its push button he would loooove to see your truck up close, he would cream his pants
Re: 12HT 75 ute ( front diff bulletproofing)
Old ARBchris12ht75 wrote:yeah if i didn't have the detroit i would not have broken them i don't think as i would of had them unlucked instead of all 4 wheels loading right up at the end of the snatch. Is your's a arb or tjm locker Hulsty?
The Silver Bullet - BJ74
Where the actions at Ontrack 4wd Club
http://www.ontrack4wdclub.com/
[url]http://www.cams.com.au/[/url]
Where the actions at Ontrack 4wd Club
http://www.ontrack4wdclub.com/
[url]http://www.cams.com.au/[/url]
Re: 12HT 75 ute (FOR SALE)
Deleted by mod due to breach of for sale rules.
Re: 12HT 75 ute (FOR SALE)
sorry to hear that you have to get rid of this mate, read your build and loved it, you did a great job and the quality of work was next to none. definately a one of a kind ute.
Hj61- ute chop, 12ht, locked, intercooled and caged
Re: 12HT 75 ute (FOR SALE)
Post it up in the for sale section like everyone else has to or I will delete this whole thread.
2008 Patrol wagon and 99 Patrol TD Ute
Cairns
Cairns
Re: 12HT 75 ute (FOR SALE)
well aint you a fuc$%ng hero!! i didn't know about the for sale section. how much harm could it possibly do anyway. Just that arrogant reply there was no need for you fuc@$ng moron............toaddog wrote:Post it up in the for sale section like everyone else has to or I will delete this whole thread.
NOW BAN ME!!!!!!!!!
Re: 12HT 75 ute (FOR SALE)
Stop being such a child.
How long have you been on here for and you reckon you dont know about the for sale section?
How long have you been on here for and you reckon you dont know about the for sale section?
2008 Patrol wagon and 99 Patrol TD Ute
Cairns
Cairns
Re: 12HT 75 ute
Hi mate, wicked looking truck and i can agree on the power of the 12ht ive done the same type of build up to my 75series with a 12ht conversion, but im a P plater so its decked out with pioneer sound system, 2x 12inch subs, 4 inch lift kit 33's and front mount intercooler, boost controller, catch can, pyro many extras but the last thing ive done is the 12ht conversion and one issues im having it the fuel return line off the fuel pump. i did have it plumbed back into the fuel intake line but i want to finish it all up properly not just for temperary, so where did you run the return line on the 12ht? Where abouts on the fuel tank? You had the 3f petrol by the looks in your photos, is the tank the same an the diesel trucks? i didnt want to drop my tank back out just to weld some tips on so i can put a hose back to the fuel tank, did you just T piece one of the breather lines or what??
Cheers mate any info will help.
Dayne.
Cheers mate any info will help.
Dayne.
Re: 12HT 75 ute
Hi There,
The guy who had this truck has sold it and no longer comes on the forum to the best of my knowledge.
Thanks,
Dan
The guy who had this truck has sold it and no longer comes on the forum to the best of my knowledge.
Thanks,
Dan
I'm not quitting drinking, I'm retiring at the top of my game - sporting comeback likely.
Who is online
Users browsing this forum: No registered users and 0 guests