Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Redzook & Germo @ Winch Challenge....

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 292
Joined: Wed Dec 04, 2002 3:51 pm
Location: Just North of Newcastle

Redzook & Germo @ Winch Challenge....

Post by Drewfus »

Things I noted:

- Whilst redzook is SPOA on 33's he's doesn't look really high.
- Germo's SPUA on 31's with 'slightly longer' shackles, is almost as high....
- Germo's 31's simex 'look' as big as Reds 33's.
- Drewfus Designs -

"Build it small, DRIVE it big..."
Top
Posts: 13555
Joined: Fri Nov 15, 2002 1:28 pm
Location: Melbourne

Post by grimbo »

you will find that the 31 Simexes are a very big 31. We have a guy in our club running them and they do appear to be not much smaller than the 34 swampers
Ransom note = demand + collage
Top
Posts: 292
Joined: Wed Dec 04, 2002 3:51 pm
Location: Just North of Newcastle

Post by Drewfus »

Then we went for a small 'play'....

Redzook sequence..
Top
Posts: 292
Joined: Wed Dec 04, 2002 3:51 pm
Location: Just North of Newcastle

Post by Drewfus »

up and away..

Then Germo...
- Drewfus Designs -

"Build it small, DRIVE it big..."
Top
Posts: 292
Joined: Wed Dec 04, 2002 3:51 pm
Location: Just North of Newcastle

Post by Drewfus »

A few more...
- Drewfus Designs -

"Build it small, DRIVE it big..."
Top
Posts: 292
Joined: Wed Dec 04, 2002 3:51 pm
Location: Just North of Newcastle

Post by Drewfus »

And then I climed aboard Tim's "Plumber's Ladder Rack" TM ;) , and then went back to the competition to watch Kermit compete.

Good to checkout Tims setup, just wondering if its possible to fit my Hilux diffs SPUA.... or if I'd have to 'throw out my morals and go SPOA'......? :lol:
- Drewfus Designs -

"Build it small, DRIVE it big..."
Top
Posts: 3269
Joined: Mon Nov 25, 2002 1:11 pm
Location: melting gears

Post by greg »

Drewfus wrote:... just wondering if its possible to fit my Hilux diffs SPUA.... or if I'd have to 'throw out my morals and go SPOA'......? :lol:


I'm thinking you may have issues with sump clearance at the front... but i could well be wrong about that.

(Sump in centre and the diff centres would be too)
DMA Founding Member #1 - Now Retired
Top
Posts: 5714
Joined: Fri Nov 22, 2002 3:55 pm
Location: Perth WA.

Post by nicbeer »

Need some info of the Hightop (Germo's).

What lift/gearing is that running. Also has the guards been cut and are they the jt2?.

Thanks

Nic
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
Top
Posts: 3269
Joined: Mon Nov 25, 2002 1:11 pm
Location: melting gears

Post by greg »

nicbeer wrote:... are they the jt2?.


From the pics above i have determined that they are Simex Centipedes (no gary - not the mud terrains).

:)
DMA Founding Member #1 - Now Retired
Top
Posts: 2817
Joined: Fri Feb 21, 2003 10:10 pm
Location: Hellbourne again

Post by bigsteve »

greg wrote:(no gary - not the mud terrains).

:)


:rofl:
yeshemesh
Top
Posts: 5714
Joined: Fri Nov 22, 2002 3:55 pm
Location: Perth WA.

Post by nicbeer »

I want the simex mud terrains. :-) .

Just wondering as that is what I want to run on my hightop.

cheers

Nic
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
Top
Posts: 292
Joined: Wed Dec 04, 2002 3:51 pm
Location: Just North of Newcastle

Post by Drewfus »

Ashley (Germo) has 5.11:1 diff gears, wide tracks, 31" simex JT1 (c'pedes).

Currently no t/case gearing (although it's high on the list of things to do...like me).

No body lift, front diff moved forward about 30mm, gaurds have been cut all around, and a bit of dodgy flareing temporarily tossed on to try and hide the 40-50mm gap between the outer skin, and the inner gaurds (whistles in the cab at speed, although the noise of the tyres overrides the wind.....).

:lol:

Trust this helps.

Sadly, I think those h/lux diffs are calling out to me......






SPUA.....




SPUA.....



More work to do.
- Drewfus Designs -

"Build it small, DRIVE it big..."
Top
Posts: 3269
Joined: Mon Nov 25, 2002 1:11 pm
Location: melting gears

Post by greg »

Drewfus wrote:Sadly, I think those h/lux diffs are calling out to me......


You should get them... Then you'll be able to run something big and groovy like a 37" bogger or something :cool:
DMA Founding Member #1 - Now Retired
Top
Posts: 292
Joined: Wed Dec 04, 2002 3:51 pm
Location: Just North of Newcastle

Post by Drewfus »

See that's where the plot thickens, I already have them, and I've got access to some 36" c/pedes......

But, how do you guy's go with insurance? or am I being to "serious"......I already have 1xspecial toy car (a street rod), I need to make this a Daily driver, and don't particularly wanna join a club due to 'politics' hence I was originally only going with the 'in-the-know' common mods like gearing etc which aren't quite as 'visual'...........

Note: my wife want's to drive this regularly to work and I want her to be safe......

Maybe I'm thinking to hard, 36"pedes and lux diffs are kinda standard aren't they? :lol: :lol:

NRMA won't mind/care.

Suppose insurance is for pussies.........


meow.
- Drewfus Designs -

"Build it small, DRIVE it big..."
Top
Posts: 3269
Joined: Mon Nov 25, 2002 1:11 pm
Location: melting gears

Post by greg »

I think 35's and spring under = removed / relocated headlights...

Insurance would be questionable. If you want to play it by the book, start talking to an engineer now about what size tyres you can run with the hilux diffs, then get the build done, engineer it, then update your insurance. I think all should be good if you do it that way.
DMA Founding Member #1 - Now Retired
Top
Posts: 13555
Joined: Fri Nov 15, 2002 1:28 pm
Location: Melbourne

Post by grimbo »

scrw all that I'm more interested in the street rod. What do you have? :D
Ransom note = demand + collage
Top
Posts: 4882
Joined: Fri Nov 08, 2002 8:36 pm
Location: Medowie, NSW

Post by redzook »

cool had a good time thanks for the pics :D

an just go SOA :finger:
Team UNDERDOG #233
WERock Australia thanks to
[url]http://www.longfieldsuperaxles.com[/url]
[url]http://www.rockbuggysupply.com[/url]
Top
Posts: 437
Joined: Mon Nov 24, 2003 4:26 pm
Location: back in the bush ;)

Post by germo »

yeah drewfus is right, all of the above, also have a corolla carby and extractors. have very very little trouble on slopes with the engine cutting out.

ashley
build http://www.outerlimits4x4.com/ftopic130159.php&highlight=
IMHO = who cares if your Opinion is Humble! its your opinion isn't it?
so IMO it a waste of a H
Top
Posts: 3722
Joined: Sat Jan 18, 2003 7:32 pm
Location: perth wa

Post by bazooked »

hey guys is kermit drivin or winchin up that hill ? looks a bit steep.. :D
Top
Posts: 292
Joined: Wed Dec 04, 2002 3:51 pm
Location: Just North of Newcastle

Post by Drewfus »

It was winched up to where that shot was taken, then driven from there on. It was a big vertical face which was cut out with a dozer/shovel.

Grimbo.....28 A roadster pickup, in progress 1/2 done.
- Drewfus Designs -

"Build it small, DRIVE it big..."
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 1 guest