Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

mazda bt50 exhast size?? with Steinbauer chip and snorkel

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
Posts: 27
Joined: Sat Jul 04, 2009 11:18 am
Location: tweedheads

mazda bt50 exhast size?? with Steinbauer chip and snorkel

Post by tommy182 »

does anyone know if a 3inch thaipan exhaust is too big for a 2010 bt50??
its got the snorkel, 31's, steel bullbar, alloy tray
apparently once the exhaust goes on we can turn the Steinbauer chip right up

any help would be great.

personally i would have said 2.5inch but the bloke at the exhaust place said 3inch is the go
and he'll get plenty of back pressure.. ?? ..

oh and he quoted $1400 for mild steel
and $2,200 for alloy
Posts: 27
Joined: Sat Jul 04, 2009 11:18 am
Location: tweedheads

Re: mazda bt50 exhast size?? with Steinbauer chip and snorke

Post by tommy182 »

not "alloy" sorry.. but what ever the upgrade of mild steel is
God of Athiests
Posts: 8336
Joined: Thu Aug 07, 2003 2:14 am
Location: Brownsville

Re: mazda bt50 exhast size?? with Steinbauer chip and snorke

Post by DamTriton »

Find a new exhaust guy if he seriously wants back pressure in a turbo set-up....
George Carlin, an American Comedian said; "Think of how stupid the average person is, and realise that half of them are stupider than that".
Posts: 27
Joined: Sat Jul 04, 2009 11:18 am
Location: tweedheads

Re: mazda bt50 exhast size?? with Steinbauer chip and snorke

Post by tommy182 »

thats my thoughts excactly. but its hard to argue with a exhaust bloke abouts exhausts, if you know what i mean..

anyone one out there thats got a straight throu 2.5 with no mufflers ??
Posts: 2526
Joined: Wed Sep 01, 2004 8:21 am
Location: Outcast Offroad

Re: mazda bt50 exhast size?? with Steinbauer chip and snorke

Post by Micka »

I would have thought twin 5" stacks coming up through the tub to be your best option. And if you want back pressure just jam some potatoes in them till it snuffs, then take a bit out. ;)
Posts: 27
Joined: Sat Jul 04, 2009 11:18 am
Location: tweedheads

Re: mazda bt50 exhast size?? with Steinbauer chip and snorke

Post by tommy182 »

thanks buddy didnt realise it was such a stupid question
Posts: 421
Joined: Fri Dec 05, 2003 12:35 pm
Location: Tweed coast

Re: mazda bt50 exhast size?? with Steinbauer chip and snorke

Post by 98lux »

Didn't the bloke/company that fitted your Steinbauer chip offer/give any info on the exaust? :?
if ya gona rev it, Chev it
Posts: 33
Joined: Sun Nov 28, 2010 12:25 pm

Re: mazda bt50 exhast size?? with Steinbauer chip and snorke

Post by JonnoD »

Personally I would go a 3" all the way. 2.5" wont flow enough. That is generally speaking with turbos. I would get a new exhuast bloke for 2 reasons. 1. As mentioned before you dont want any back pressure with a turbo set up and .2. he charges way to much
Posts: 117
Joined: Mon May 26, 2008 8:52 pm
Location: Cobar

Re: mazda bt50 exhast size?? with Steinbauer chip and snorke

Post by montana »

i wouldnt wind the chip all the way ,3/4 is best power/economy with most of them. instead of replacing the whole system try taking out the muffler and fit a straight through pipe to what you have and see how it goes before spending the money.
Posts: 2526
Joined: Wed Sep 01, 2004 8:21 am
Location: Outcast Offroad

Re: mazda bt50 exhast size?? with Steinbauer chip and snorke

Post by Micka »

tommy182 wrote:thanks buddy didnt realise it was such a stupid question
No your question isn't stupid...the answer from the exhaust guy is. I was just replying in the same theme. You're obviously new here. You'll get used it.

For a 3" mild steel straight thru you should be paying around $600 - 800 depending on the shop.

Stainless is nice, in theory, but save the money and just ask them to give the mild a few extra coats of paint.
Post Reply

Who is online

Users browsing this forum: No registered users and 8 guests