Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
How accurate are factory temp gauges?
Moderators: toaddog, TWISTY, V8Patrol, Moderators
How accurate are factory temp gauges?
I'm wondering if factory (OEM) temp gauges are accurate enough for general use? Is it worth installing an aftermarket temp gauge instead?
Re: How accurate are factory temp gauges?
IMHO they are usually fine for normal use, but not "accurate" in the sense of telling you to the nearest degree what the actual temperature is. They are accurate in the sense of telling you whether you are in a safe operating range or not.
AFAIK some at least have good resolution only in the "normal" range or close to it, and simply go to an extreme reading outside that. In other words it will tell you you're overheating but not by how much.
There are other gauges I would probably look at upgrading first. For example, I would rather have oil pressure than just an oil light, things like that.
AFAIK some at least have good resolution only in the "normal" range or close to it, and simply go to an extreme reading outside that. In other words it will tell you you're overheating but not by how much.
There are other gauges I would probably look at upgrading first. For example, I would rather have oil pressure than just an oil light, things like that.
This is not legal advice.
Re: How accurate are factory temp gauges?
Factory gauges are fine for ordinary use.
Personally I'd rather an oil light than a gauge. Oil pressure isn't something I need to know when driving. And a lit light attracts more attention than the gauge.
I once forgot to reconnect the oil pressure plug on my 80, and i drove around for a few days with the oil pressure gauge reading 0. Too bad if there actually was a problem.
Personally I'd rather an oil light than a gauge. Oil pressure isn't something I need to know when driving. And a lit light attracts more attention than the gauge.
I once forgot to reconnect the oil pressure plug on my 80, and i drove around for a few days with the oil pressure gauge reading 0. Too bad if there actually was a problem.
The worst part about being told you have Alzheimer's, is that it doesn't just happen once.
Re: How accurate are factory temp gauges?
Wouldn't most ECU's measure the oil pressure and flash the CHeck Engine light if there's a drop in pressure?oldmate wrote:Factory gauges are fine for ordinary use.
Personally I'd rather an oil light than a gauge. Oil pressure isn't something I need to know when driving. And a lit light attracts more attention than the gauge.
I once forgot to reconnect the oil pressure plug on my 80, and i drove around for a few days with the oil pressure gauge reading 0. Too bad if there actually was a problem.
God Of Emo
Posts: 7350
Joined: Sun Aug 24, 2003 7:04 pm
Joined: Sun Aug 24, 2003 7:04 pm
Location: Newy, home of the ZOOK (Rockin the 'diff)
Contact:
Re: How accurate are factory temp gauges?
TheOtherLeft wrote:Wouldn't most ECU's measure the oil pressure and flash the CHeck Engine light if there's a drop in pressure?oldmate wrote:Factory gauges are fine for ordinary use.
Personally I'd rather an oil light than a gauge. Oil pressure isn't something I need to know when driving. And a lit light attracts more attention than the gauge.
I once forgot to reconnect the oil pressure plug on my 80, and i drove around for a few days with the oil pressure gauge reading 0. Too bad if there actually was a problem.
No, apart from fairly new or expensive cars most ECU's dont moitor oil pressre.
Layto....
[quote="v840"]Just between me and you, I actually really dig the Megatwon, but if anyone asks, I'm going to shitcan it as much as possible! :D[/quote]
Re: How accurate are factory temp gauges?
Toyota temperature gauges are shit. On my TD 80 series I use a VDO EGT and Watchdog thingo for coolant temp. The factory gauge doesnt move at all between about 55 and 105 degrees coolant temp, then at 108 all of sudden it goes to the top (red). Designed flat spots are all well and good I guess, but seem pointless if they dont move until it's too late.
Re: How accurate are factory temp gauges?
depends on model a bit. some are absolutely crap. combine that with a weak head etc its really easy to overheat and blow the motor.TheOtherLeft wrote:I'm wondering if factory (OEM) temp gauges are accurate enough for general use? Is it worth installing an aftermarket temp gauge instead?
most are idiot proof so the normal up/down in temp doesn't scare the driver. however that can make them slow to react if a fault happens.
if you have an engine prone to cracking heads etc then i would fit an aftermarket gauge.
God of Magnificant Ideas!
Re: How accurate are factory temp gauges?
YESTheOtherLeft wrote: Is it worth installing an aftermarket temp gauge instead?
the std guage really reads....
*just started and warming up
*driving normal temps
* opps ....engines phucked
[color=blue][size=150][b]And your cry-baby, whinyassed opinion would be.....? [/b][/size][/color]
Re: How accurate are factory temp gauges?
Agree with this. Value for money I find VDO is pretty good with a reasonable reputation to boot.V8Patrol wrote:YESTheOtherLeft wrote: Is it worth installing an aftermarket temp gauge instead?
the std guage really reads....
*just started and warming up
*driving normal temps
* opps ....engines phucked
-Scott- wrote:Isn't it a bit early in the day to be pissed?
Re: How accurate are factory temp gauges?
x2stuee wrote:Value for money I find VDO is pretty good with a reasonable reputation to boot.
With VDO, you're not paying for extra bling and window stickers.
Tetanus rolling on 37's
Re: How accurate are factory temp gauges?
Never in the whole history of the world has there ever been a statement more true than the above.V8Patrol wrote:YESTheOtherLeft wrote: Is it worth installing an aftermarket temp gauge instead?
the std guage really reads....
*just started and warming up
*driving normal temps
* opps ....engines phucked
Cheers,
Micko
[quote="bogged"]
Whats that old saying that I've modernized for this scenario
"fuked over once, shame on her, fuked over twice, shame on me."
(c) Bogged 2008[/quote]
Whats that old saying that I've modernized for this scenario
"fuked over once, shame on her, fuked over twice, shame on me."
(c) Bogged 2008[/quote]
Who is online
Users browsing this forum: No registered users and 1 guest