Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

rhs drive shaft

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 53
Joined: Mon Jun 14, 2010 5:01 pm
Location: central coast n,s,w

rhs drive shaft

Post by xj33 »

looking at making a rhs drive shaft for a hilux does anyone know what size steel i need,
Top
Posts: 586
Joined: Thu May 01, 2008 9:59 pm
Location: brisbane

Re: rhs drive shaft

Post by banks001 »

i used, 50x50x5 and 40x40x4,

its kinda small, maybe something a bit bulkyer, check yamaha lux build up its a few pages back in the members now
gen 3 hilux :)
3rz, lockers, gears, trail gear, longs, JT2's
Top
Posts: 1490
Joined: Thu Nov 28, 2002 12:53 pm
Location: Brisbane - D'Bay

Re: rhs drive shaft

Post by Willy Hilux »

That should be heaps strong. Standard tail shaft are paper thin, ok maybe about 1mm.
AMADAXTREME Racing
Sponsors-
AmadaXtreme
Superior Engineering
www.superiorengineering.com.au/
Top
Posts: 837
Joined: Sat Aug 16, 2008 5:41 pm
Location: out playin

Re: rhs drive shaft

Post by stock 4runner »

nope if you read yamahas build thread you will see his twisted peice of 40x40x4
i was running 50x50x5 and 40 x40 solid that i had cross drilled to save weight and it didnt twist
Rims flipped from $50
Top
Posts: 53
Joined: Mon Jun 14, 2010 5:01 pm
Location: central coast n,s,w

Re: rhs drive shaft

Post by xj33 »

going to try 50x50 & 40x40 any idea how long they need to be
Top
Posts: 245
Joined: Tue Mar 17, 2009 9:23 pm
Location: Sydney

Re: rhs drive shaft

Post by 4RUNNER_01 »

xj33 wrote:going to try 50x50 & 40x40 any idea how long they need to be
Just measure the length of your shaft after the unis and make it about say 100mm shorter i think thats what i did havnt had any probs using those sizes for the last year or more.
BOBBED 84' 4Runner 2.8L Chugger
35's, Locker's, High steer, RUF, 4 link rear, Crawler Gears.
Top
Posts: 81
Joined: Sun Jul 19, 2009 3:48 pm
Location: newcastle

Re: rhs drive shaft

Post by specs »

^^^ what he said.
most i have seen and measured have been around 400mm long.
Top
Posts: 586
Joined: Thu May 01, 2008 9:59 pm
Location: brisbane

Re: rhs drive shaft

Post by banks001 »

i just got 2 bitst that were 700 long, better to have more than not enough
gen 3 hilux :)
3rz, lockers, gears, trail gear, longs, JT2's
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 82 guests