just curious as to what are peoples solutions for dislocating cones???
im thinking of using 80 series landcruiser front bumpstops for the rear of my rangie, they look like theyll work...
my rangie has a 3 inch spring lift and ALWAYS pops the coils out at the top,
becoming a real problem and causing damage to the inside of the tyre so i want to get it sorted pretty quickly.
cheers dave
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
80 series bumpstops/dislocating cones
Moderator: Micka
80 series bumpstops/dislocating cones
RN105 dual cab 253 v8
Re: 80 series bumpstops/dislocating cones
I ran these for three yeas without problems i just used stainless steel hose clamps at the top to hold the coil inplace and mounted the 80 series bumpstops on the bottom worked a treat.
the only problem i had was when i went to remove them i had to cut them in half as they filled up with mud & sand couldn't get my socket set down to undo the bolt
the only problem i had was when i went to remove them i had to cut them in half as they filled up with mud & sand couldn't get my socket set down to undo the bolt
defender 110,4.6,auto,36simex,maxidrive everything. "JEEP" your right, I dont understand????
Re: 80 series bumpstops/dislocating cones
excellent mate thanks for that...im guna try and run them at the top and see how that goes
RN105 dual cab 253 v8
Who is online
Users browsing this forum: No registered users and 0 guests