Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

99 patrol tail shaft issues

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 5
Joined: Wed Mar 03, 2010 11:09 am
Location: Sunshine coast

99 patrol tail shaft issues

Post by nats_surf »

Hey guys i lifted my 4.5ltr GU patrol the other day i went to turn the tail shaft around but found that the end going to the diff flange has a big ring around it with a weight, what to do now? Any help will be greatly appreciated.
Top
Posts: 409
Joined: Thu Mar 20, 2008 7:43 am
Location: Aus

Re: 99 patrol tail shaft issues

Post by macneil »

how bad is it? guessing its been hitting the cross member??
Top
Posts: 5
Joined: Wed Mar 03, 2010 11:09 am
Location: Sunshine coast

Re: 99 patrol tail shaft issues

Post by nats_surf »

well with the sway bars connected it sits about 2mm off but I still have 2 inch's of travel left in the shocks so yeah it will be well and truly hitting.
Top
Posts: 48
Joined: Sat Feb 05, 2011 1:25 pm

Re: 99 patrol tail shaft issues

Post by jrh86 »

Can you try a ute tail shaft if you think the damper is gonna hit or take it to the tailshaft guys in nambour and get the tail shaft modded so you can flip it
Sunshine coast based onsite motorcycle repairs
Fully insured
Call james at ozy offroad
0421166146
Top
Posts: 38
Joined: Fri Feb 20, 2009 9:55 am
Location: brisbane

Re: 99 patrol tail shaft issues

Post by burleygu »

can always remove the tailshaft and neatly notch and weld your chassis crossmember. if your having issues with the rear you may have to take a close look at the front also incase you have to notch the gearbox crossmember also
Top
Posts: 5
Joined: Wed Mar 03, 2010 11:09 am
Location: Sunshine coast

Re: 99 patrol tail shaft issues

Post by nats_surf »

thanks guys to all the suggestions got it all solved. i got a damaged tail shaft out of a 4.2TD knocked the flange of the end, fitted new uni's, and put it all back together. Then i was able to turn the shaft around.
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 82 guests