A mate has a gen 1 diesal paj & wants to know if there is a front diff lock available for them. I've done a seach but couldn't find anything.
Thanks in advance for any help.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Diff Locks
Moderator: -Scott-
Diff Locks
You didn't just fall out of the ugly tree you were gangbanged by the whole f@#&ing forest
Re: Diff Locks
did you look through the tech database? the only locker made for the gen1's only fits the 8" diff found in the V6
mike_nofx wrote:Is "Athol" what people with a lisp call him??
RAY185 wrote:I think it's delightful! So does my wife Bill.
Re: Diff Locks
If you have a 3.0v6 manual yes of course... ARB. 2.5 td/tdi and 3.0 automatic no... they have small front diff.
'96 gen2 2.8 TDI, 33", 4.9 gear ratio,front Arb rear stock locker, Air Flow snorkel, no sway bar
http://www.fondente.org
http://www.youtube.com/fondente71
http://picasaweb.google.com/fondente
http://www.fondente.org
http://www.youtube.com/fondente71
http://picasaweb.google.com/fondente
Re: Diff Locks
incorrect if im not mistaken for a gen1fondente wrote:If you have a 3.0v6 manual yes of course... ARB. 2.5 td/tdi and 3.0 automatic no... they have small front diff.
V6 is the only one in a gen1 with the 8" front diff
mike_nofx wrote:Is "Athol" what people with a lisp call him??
RAY185 wrote:I think it's delightful! So does my wife Bill.
Re: Diff Locks
just done this swap out, the 7.25 diff comes in the swb v6 manual jero as well for some reason.
anyways, i had the 4 pin centre 7.25 diff, the tailshaft is all good for the 8", the cvs bolt up as well,
so the conversion could not get more simple really, so just do it. cheers~matt
anyways, i had the 4 pin centre 7.25 diff, the tailshaft is all good for the 8", the cvs bolt up as well,
so the conversion could not get more simple really, so just do it. cheers~matt
NH Jero with supercharged commodore v6 conversion
http://www.performanceforums.com/forums/showthread.php?t=67259036
Twin locked + 33's
http://www.performanceforums.com/forums/showthread.php?t=67259036
Twin locked + 33's
Who is online
Users browsing this forum: No registered users and 6 guests