first off ill quickly say yes im aware of the search button and have looked but im in a bit of a hurry and it's a bit complicated what im looking for i think:s..
bought GU 4.6 ratio front and rear diff centre's for the mav which have the 3.9 gear's that are standard as far as i know of! pulled the rear out today and swapped the centre over, all bolt up fine but the axle's wont slide in! so i pulled the centre back out and sat on some timber and retried to slide the axle in whilst out of the housing and still a fail, as far as i can tell with the vernier's it seem's to look like the axle is a couple of mm larger:s i have another patrol diff with the 4.1 gears and the axle slide's in fine so im thinking different splined axle's are needed? the only thing i don't understand is why the centre still bolt's into the housing fine? neither does the rear axle slide into the front centre either(which i was expecting)..
any help or tips greatly appreciated;) cheer's Ben.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
gu diff centre's in gq/mav diff's. urgent:(
gu diff centre's in gq/mav diff's. urgent:(
"just when i think you've gone end said the stupidest thing ever, you keep on talking"
Re: gu diff centre's in gq/mav diff's. urgent:(
hey bud ive just had the same problem wat you will have to do is split the centres from the crown wheel then mix and match your original centres to your new crown and pinion.if you are not experienced at this dont try this at home cause if you dont set them up properly it will not be pretty. your local diff shop will prob do this for approx 400 the pair plus a set of new bearings would be a good idea at the same time.by doing this you will then be able to slide your axles in and no more problem
Re: gu diff centre's in gq/mav diff's. urgent:(
ah i see, bummer then. yeah ill get them swapped over i suppose, i cbf mucking around with all that clearance and backlash crap.
just means car will be off the road for a couple of days, what can ya do i guess. thanks mate
just means car will be off the road for a couple of days, what can ya do i guess. thanks mate
"just when i think you've gone end said the stupidest thing ever, you keep on talking"
Re: gu diff centre's in gq/mav diff's. urgent:(
actually in that case is there any1 in melbourne who know's what there doing that want's to earn them selves a slab of there choice? haha
i just want the rear done for now the front can wait a few week's,serious offer though cause i dont know what im doing with all that clearance crap and i kinda need it done now it's out
i just want the rear done for now the front can wait a few week's,serious offer though cause i dont know what im doing with all that clearance crap and i kinda need it done now it's out
"just when i think you've gone end said the stupidest thing ever, you keep on talking"
Re: gu diff centre's in gq/mav diff's. urgent:(
you wouldn't know of any cheap joint's in melbourne by any chance? i just rang northern diif's and he quoted me $550 with bearings just for the rear!BIG BETTSY wrote:hey bud ive just had the same problem wat you will have to do is split the centres from the crown wheel then mix and match your original centres to your new crown and pinion.if you are not experienced at this dont try this at home cause if you dont set them up properly it will not be pretty. your local diff shop will prob do this for approx 400 the pair plus a set of new bearings would be a good idea at the same time.by doing this you will then be able to slide your axles in and no more problem
"just when i think you've gone end said the stupidest thing ever, you keep on talking"
Re: gu diff centre's in gq/mav diff's. urgent:(
you didn't happen to put the front in the back and vice versa?
the axles are a few fractions of an inch different in size...
I had some lockers installed and somehow the front side gears went into the back and vice versa and it caused a great deal of confusion.
double check that if you haven't.
also $550 with bearings probably isn't too bad as the bearings are... about $300.
From what I know there were not different splines in the gq/mav or gu series patrols. But i have been wrong before
the axles are a few fractions of an inch different in size...
I had some lockers installed and somehow the front side gears went into the back and vice versa and it caused a great deal of confusion.
double check that if you haven't.
also $550 with bearings probably isn't too bad as the bearings are... about $300.
From what I know there were not different splines in the gq/mav or gu series patrols. But i have been wrong before
*there's a rock, drive over it :) there's a bigger rock, drive over it :twisted: there's an even bigger rock, oops broke it :oops: Upgrade broken bit :bad-words:
Goto *
Goto *
Who is online
Users browsing this forum: No registered users and 2 guests