Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

high mount v8 alternator

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 1595
Joined: Tue Dec 02, 2003 4:11 pm
Location: Warner, Brisbane Nth

high mount v8 alternator

Post by Spartacus »

i have a holden EFI 304 v8 that is mounted low and about 150mm behind the
firwall of my patrol :cool:
The problem is now the alternator is cant go back on because the chassis is in the way.

looking for pics or ideas to mount alternator above where it was from factory

cheers
MULL
Top
Posts: 1325
Joined: Wed Jul 04, 2007 4:13 pm
Location: brisbane australia..logan reserve

Re: high mount v8 alternator

Post by 11_evl »

will an older HQ style bracket fit on? might pay to look around some of the old car mags for pic than go searching wrecking yards for a bolt on bracket
michael
Top
Posts: 632
Joined: Wed Sep 07, 2005 8:59 pm
Location: South Gippsland

Re: high mount v8 alternator

Post by hiluxmad »

i mounted a 1 fz hundred series alt where the old holden a/c was worked a treat only a very minor mod too.
Keep it shiny side up!
Now doing general fab work and painting
trays, trailers, engine swaps on request, some tube work, silo section sliders, rust repairs, ute chops etc
Top
Posts: 699
Joined: Tue Apr 08, 2008 3:57 pm
Location: mackay

Re: high mount v8 alternator

Post by sprungupcruiser »

This is on my 308, made the bracket out 8mm plate and just found myself a longer belt.
Image
Image
Braden Tagg of XRO Racing is scum and not to be dealt with. See here http://www.outerlimits4x4.com/viewtopic.php?f=10&t=223295

bj73 build up thread http://www.outerlimits4x4.com/ftopic168809.php
Top
User avatar
HG
Posts: 450
Joined: Mon Aug 02, 2004 10:11 pm
Location: Mexico where the hills are big

Re: high mount v8 alternator

Post by HG »

I made my own brackets to mount it as high as I could.
Image
The swing arms are bolted to the head and the top bracket is a fixed arm that bolts to the water pump .
Cheers
Andrew
----------------------
Just a few mods, nothing over the top.:)
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 1 guest