Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

fine spline VS coarse spline

Tech Talk for Rover owners.

Moderator: Micka

Posts: 5803
Joined: Wed Feb 19, 2003 3:02 pm
Location: Brisbane

Re: fine spline VS coarse spline

Post by ISUZUROVER »

KiwiBacon wrote:But I have owned this 10/24 spline vehicle for over 10 years and have done plenty of easy trails without breaking anything. OMG, how is that possible? :armsup:
I don't think anyone is questioning that you can drive a standard disco or RRC on-road or on easy tracks with 29" tyres and light loads without breaking anything.

But if your definition of driving a vehicle "knowingly" means not driving steep grippy hill offroad where you need 1st or 2nd low then that is something else...
_____________________________________________________________
RUFF wrote:Beally STFU Your becoming a real PITA.
Posts: 2158
Joined: Sat Jan 20, 2007 8:16 am
Location: New Zealand

Re: fine spline VS coarse spline

Post by KiwiBacon »

ISUZUROVER wrote:
KiwiBacon wrote:But I have owned this 10/24 spline vehicle for over 10 years and have done plenty of easy trails without breaking anything. OMG, how is that possible? :armsup:
I don't think anyone is questioning that you can drive a standard disco or RRC on-road or on easy tracks with 29" tyres and light loads without breaking anything.

But if your definition of driving a vehicle "knowingly" means not driving steep grippy hill offroad where you need 1st or 2nd low then that is something else...
The gear you choose makes no difference Ben. There's not enough traction offroad or even on-road with 29" tyres to break stock axles without shock-loading them. Driving them knowingly means avoiding shock-loads as best you can. Steep grippy hills aren't a problem.
Post Reply

Who is online

Users browsing this forum: No registered users and 32 guests