HEY, I went fourbyn yesterday and noticed my low range gearing sucks in my 90 rocky f75 sports afield turbo wagon. Did i hear correctly that you can use f20 gears t lower the low range gearing? and or could i adapt a hilux tranny instaed to fit after market gears.
thanks
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
LOW TRANNY GEARS ROCKY
Moderator: Tiny
Re: LOW TRANNY GEARS ROCKY
hmmm, sounds easy enough. I wonder if I could adapt a hilux tranny.could get heaps of low low gears for it. i think my bro has one.
Re: LOW TRANNY GEARS ROCKY
i think if you pull the transfer case from the gearbox you can see the output
is like a splined cup.
if you can cut the hilux mounting face off and replace with daihatsu bolt
pattern, all i guess you need is a machined spline to go into the daihatsu
"cup"
Ps its been a while - cant remember if its the right gearbox im thinking off
is like a splined cup.
if you can cut the hilux mounting face off and replace with daihatsu bolt
pattern, all i guess you need is a machined spline to go into the daihatsu
"cup"
Ps its been a while - cant remember if its the right gearbox im thinking off
MULL
Re: LOW TRANNY GEARS ROCKY
F20 gears wont fit into a f75 transfer. They are smaller and not as strong.
When i blew my transfer i was going to use the parts out of a f20 box i had but they were not even close.
When i blew my transfer i was going to use the parts out of a f20 box i had but they were not even close.
[color=#FF4000][/color]89 rocky V6 2"efs adj/sway&panhard
Re: LOW TRANNY GEARS ROCKY
have you put petrol r&p in as that will lower the gearing
Re: LOW TRANNY GEARS ROCKY
i really wanna lower the low range only. thanks anyway.
cheers for the info guys!!!!!
i will keep you posted! .... pun of the year. or not.
cheers for the info guys!!!!!
i will keep you posted! .... pun of the year. or not.
Re: LOW TRANNY GEARS ROCKY
hey mate did you end up trying to fit the hilux transfer ? any news
Re: LOW TRANNY GEARS ROCKY
Another smarter option ( IMO anyway ) would be to run a divorced Sierra Tcase
Run a short saft off the output shaft of teh Feroza box to the Sierra TCase.
Absolute heaps of ratios for a Sierra TCase and not stupidly heavy.
Run a short saft off the output shaft of teh Feroza box to the Sierra TCase.
Absolute heaps of ratios for a Sierra TCase and not stupidly heavy.
( usual disclaimers )
It seemed like a much better idea when I started it than it does now.
It seemed like a much better idea when I started it than it does now.
Who is online
Users browsing this forum: No registered users and 2 guests