I have had to use a HZJ75 series flywheel in my HZJ105 series it is 6 mm narrower then the fly wheel on the 105 but the ring gears are the same . we spaced out the clutch fork pin with 4 x SS washers so that the fork sits out 6 mm further as well , so it shouldn't have changed the fulcrum. can anyone see any Issues with what i have done if so can you clear me up. i have just taken it for a test run and the new Rebuilt gear box changes good but am concerned why the clutch is really light to press (lighter then previous clutch kit) . when pressed all the way to the floor then released it comes up about 20-25mm before it engages., does all this sound right as its my wife's and kids car and i need it to be spot on . ANY serious input would be appreciated.
cheers Mondo
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Hzj 75 flywheel fit into Hzj105 ?
Moderators: toaddog, Elmo, DUDELUX
Who is online
Users browsing this forum: No registered users and 0 guests