Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
TUFF 75 series utes
Moderators: toaddog, Elmo, DUDELUX
Re: TUFF 75 series utes
The pics seem to be chopped in half when posted up on outers hmmm
Re:
awesome set up you got there i'm wanting to know how you set up the coil springs and what it cost i'd love to set something like that on my 75 with it's heavy duty springs and no flexMosko111 wrote:Some photos of my cruiser with the new quick paintjob and competing at the 2010 Opposite Lock Mackay Offroad Challenge
The bes t photo ive ever had taken of the old girl
Re: TUFF 75 series utes
Lockright = Chirpies!Stackson45 wrote:Sure have!
Just fitted my front 4.56 diff gears (to match the rear) and Lockrights front and rear.
Very keen to get it out bush and see how it goes.
(PS - should be hitting the fun stuff soon - will update on performance)
Landcruiser UTE 1996 FZJ75 - SPOA, 35"s,
extended chassis, poor mans extra cab, 4.56 diff gears, Lockright front, chinese air locker rear...
extended chassis, poor mans extra cab, 4.56 diff gears, Lockright front, chinese air locker rear...
Re: TUFF 75 series utes
Lockrights out bush go pretty good so far, have only had it out once, going to Stockton Beach tomorrow, see how they go on sand.
I've since built an exo, and done some more to the interior.....
I've since built an exo, and done some more to the interior.....
Landcruiser UTE 1996 FZJ75 - SPOA, 35"s,
extended chassis, poor mans extra cab, 4.56 diff gears, Lockright front, chinese air locker rear...
extended chassis, poor mans extra cab, 4.56 diff gears, Lockright front, chinese air locker rear...
Re: TUFF 75 series utes
nothing fancy...
redid the bullbar, side steps, side bars, snorkel, and rims in subframe enamel gloss black. also made a system so my engel fits behind the cab.
redid the bullbar, side steps, side bars, snorkel, and rims in subframe enamel gloss black. also made a system so my engel fits behind the cab.
Re: TUFF 75 series utes
maddog_75 wrote:nothing fancy...
redid the bullbar, side steps, side bars, snorkel, and rims in subframe enamel gloss black. also made a system so my engel fits behind the cab.
Saw this truck round Leeming last week.. I was the 80 in the car park with the wheel missing.... well was laughing at the mate with the wheel missing....
would like to know more about the engel set up looked pretty smick... and what is on the other side....
cheers
Swag_Man
Re: TUFF 75 series utes
in the car park?
at the bullcreek shops or where?
honestly dont remember seeing a missing wheel'd 80 haha
you in the leeming area too? you probably 'heard' me drive off as its not the quietest 75 around haha
otherside is just a spare wheel carrier with a fold down ramp. the engel side used to be a twin oxy bottle/oxy reel holder which i ground off all the mounts, widened, extended the floor of it, and the engel is held in the the 2 low sides on the bottom as well as the rubber based tab on the back (slight pressure down on the rear handle) and the front bit is just the square tube with the bar and strip of rubber on the bottom which applies pressure to the front handle to hold it down, with a nut in the bottom of the tube and a m12 bolt going through the base of the holder so its removable. also lockable.
at the bullcreek shops or where?
honestly dont remember seeing a missing wheel'd 80 haha
you in the leeming area too? you probably 'heard' me drive off as its not the quietest 75 around haha
otherside is just a spare wheel carrier with a fold down ramp. the engel side used to be a twin oxy bottle/oxy reel holder which i ground off all the mounts, widened, extended the floor of it, and the engel is held in the the 2 low sides on the bottom as well as the rubber based tab on the back (slight pressure down on the rear handle) and the front bit is just the square tube with the bar and strip of rubber on the bottom which applies pressure to the front handle to hold it down, with a nut in the bottom of the tube and a m12 bolt going through the base of the holder so its removable. also lockable.
Re: TUFF 75 series utes
yeah we heard yeah then saw and drawled... yeah it looked like a spare wheel rack but was not sure... we were at the Leeming shops behind the chicken treat.maddog_75 wrote:in the car park?
at the bullcreek shops or where?
honestly dont remember seeing a missing wheel'd 80 haha
you in the leeming area too? you probably 'heard' me drive off as its not the quietest 75 around haha
otherside is just a spare wheel carrier with a fold down ramp. the engel side used to be a twin oxy bottle/oxy reel holder which i ground off all the mounts, widened, extended the floor of it, and the engel is held in the the 2 low sides on the bottom as well as the rubber based tab on the back (slight pressure down on the rear handle) and the front bit is just the square tube with the bar and strip of rubber on the bottom which applies pressure to the front handle to hold it down, with a nut in the bottom of the tube and a m12 bolt going through the base of the holder so its removable. also lockable.
i live up the road in north lake. ..
Cheers
Re: TUFF 75 series utes
a week ago at leeming shops...
that must of been when i was getting fuel for the car and forgot my ShortyIQ discount fuel docket eh! haha
that was before i got all the paintwork and rims done! would of liked it even more if you saw it in its new form haha
i live near intersection of karel ave and south street, so i'm always around
cant remember if i was giving it a bit of gas or just taking it easy while driving... how'd it sound from a distance?
that must of been when i was getting fuel for the car and forgot my ShortyIQ discount fuel docket eh! haha
that was before i got all the paintwork and rims done! would of liked it even more if you saw it in its new form haha
i live near intersection of karel ave and south street, so i'm always around
cant remember if i was giving it a bit of gas or just taking it easy while driving... how'd it sound from a distance?
Re: TUFF 75 series utes
would of seen it a bit like this ay?
Re: TUFF 75 series utes
Can't really remember was a little pre occupied getting mates car back together but remember it as the tray was set back with the engel.... ands did sound nice...maddog_75 wrote:would of seen it a bit like this ay?
Let us know next time your up for a wheel...
Cheers
Re: TUFF 75 series utes
saturday 12th of feb, got a few guys from the navara forum going to mundaring powerlines for a day trip as a lil fundraiser for the floods.
basically $10 bucks per car and we'll have a bbq on the way.
supposed to be meeting at kfc on great eastern hwy at 10am, got a mate of mine meeting at my house around 9:30 or so.
if you got the day off then come along
basically $10 bucks per car and we'll have a bbq on the way.
supposed to be meeting at kfc on great eastern hwy at 10am, got a mate of mine meeting at my house around 9:30 or so.
if you got the day off then come along
Re: TUFF 75 series utes
Here's mine
Re: TUFF 75 series utes
Hey mudvayne what kind of lift have you got on your 75 there mate?
Re: TUFF 75 series utes
thewayitis wrote:
hey mate where did you get your cooler from and how much was the setup if you dont mind me asking
also what boost and EGTs are you getting from that setup ?
cheers chachi
Re: TUFF 75 series utes
2 Inch suspension and 33s so still pre small still in school but so i cant spend much on it at the moment...., since this photo iv put extended shackles on so another 2 inches into it
You do not have the required permissions to view the files attached to this post.
Re: TUFF 75 series utes
2" shackles lift it 1"
Re: TUFF 75 series utes
so how much do my 16' coilovers give me over standard on 42's ?maddog_75 wrote:2" shackles lift it 1"
xxxx wrote:
Re: TUFF 75 series utes
dont know but when i put my 42s on its an instant 5" lift haha
Re: TUFF 75 series utes
sprung over . 39 claws , piss weak lsd
You do not have the required permissions to view the files attached to this post.
Re: TUFF 75 series utes
michaelwitham wrote:sprung over . 39 claws , piss weak lsd
You do not have the required permissions to view the files attached to this post.
Re: TUFF 75 series utes
Wow! my ute has changes lots in the last year!
Re: TUFF 75 series utes
thewayitis wrote:Wow! my ute has changes lots in the last year!
Nice mate ,
What scoop do you have on the 75 there
Re: TUFF 75 series utes
Its a 73 but its worthy of this thread
Locktup4x4.com.au - For all of your hardcore gear
Outlaws4x4.com
Outlaws4x4.com
Re: TUFF 75 series utes
my mates race car, gen 3, dana 60 front, foxys, 37 treps
Bravery isnt saving someone from a burning house. Real bravery is tempting a fart when you have diarrhea.
ROCKHAMPTON LOCAL LEGEND
http://www.youtube.com/watch?v=Vy2hVtJv8tw
ROCKHAMPTON LOCAL LEGEND
http://www.youtube.com/watch?v=Vy2hVtJv8tw
Re: TUFF 75 series utes
It's a bundy not a 75 (well it was a bundy)
Re: TUFF 75 series utes
Mine is still in the build but it does drive now
80 series diff's front and rear with custom 3 link rear. Also running fox shocks, Yet todo a flex shot but it will come
80 series diff's front and rear with custom 3 link rear. Also running fox shocks, Yet todo a flex shot but it will come
Re: TUFF 75 series utes
Ill play
94' 75 series, SOA, 35's, 2" wheeled spaced, Custom winch, in the middle of custom tray, 12 bils... = Good Fun!
94' 75 series, SOA, 35's, 2" wheeled spaced, Custom winch, in the middle of custom tray, 12 bils... = Good Fun!
Last edited by Plageman on Thu Nov 03, 2011 3:13 pm, edited 1 time in total.
75 Series Cruiser, SOA, 35s,
Re: TUFF 75 series utes
when i first got my ute
Who is online
Users browsing this forum: No registered users and 22 guests