Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

80 series high pinion info needed

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 209
Joined: Thu Nov 05, 2009 10:11 am
Location: learning new stuff

80 series high pinion info needed

Post by discothrasher »

hey all
i need some info i have a hilux rear center with a arb locker in it ,as a spare and am putting a 80 series high pinion diff center into the front of my truck will the arb locker from the hilux center work in the 80 series high pinion center ...they both have 8' crown wheels

cheers kelvin
2005 GUIV 4.2 STS
TUFF TRUCK 2015 PROJECT TEAM OUTCAST
THANKS : OUTCAST OFFROAD
NERANG DIFFERENTIALS
Top
Posts: 7
Joined: Fri Feb 06, 2009 2:39 pm
Location: BERWICK

Re: 80 series high pinion info needed

Post by TRISHR »

It sure will, if is to suit the later 1990+ hilux it will go straight in if its the early with 45mm carrier bearings it would need some sleeves machined up to fit the 50mm carrier bearings of the 80 front.

Wally
Top
Posts: 209
Joined: Thu Nov 05, 2009 10:11 am
Location: learning new stuff

Re: 80 series high pinion info needed

Post by discothrasher »

thanks for the reply it is 1990 + thanks again
cheers kelvin
2005 GUIV 4.2 STS
TUFF TRUCK 2015 PROJECT TEAM OUTCAST
THANKS : OUTCAST OFFROAD
NERANG DIFFERENTIALS
Top
Posts: 1231
Joined: Sun May 15, 2005 1:00 pm
Location: Bayside, Brisbane

Re: 80 series high pinion info needed

Post by Mr DJ »

Thought you could just change bearings since the RD132 now fits all Toyota 8" C&P diffs, just chabge bearing to suit application.

Oh yea, nice avatar :finger:
91' Hilux Surf with the usual mods & a few different ones ....
Coil SAS by www.budscustoms.com.au
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 56 guests