Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
rear tralling arms
rear tralling arms
I'm about to put new bushes in my rear arms as they are worn out, while i have them out i'm thinking about makeing them more stronger by replacing the pipe with a thicker bit and a touch longer "16mm",to get the pinion angle back to normal because i have 6inch springs. My question is would 16mm longer than standard be the right measurement and do i have to do any thing to the upper tralling arms like shorten or lenghthen them?
Re: rear tralling arms
On my 4inch lifted gq I sleeved the lower rear arms, made them 16mm longer and left the uppers alone, seems to be working fine for me.
But not sure with regard to your 6 inch lift
But not sure with regard to your 6 inch lift
GQ Patrol Wagon, 6 point roll cage
351 cleveland, CHI heads, solid cam, Funnelweb single plane, 750 HP DP
351 cleveland, CHI heads, solid cam, Funnelweb single plane, 750 HP DP
Who is online
Users browsing this forum: No registered users and 1 guest