i have just fitted a 5l with a 2lte turbo unit, and have had the guts of my 5l pump swapped into a 2lt mechanical pump housing (so i dont have the timing control valve and now i have a tacho sensor)
i have timed the pump with a dial gauge to the specs as per the 5l toyota manual, problem being is it is flat to drive, it goes ok but not any better than a 2lte, it reves right out but does not make any black smoke at all
i would like to know what anyone has set the pump at for their 5lt conversions.
the factory spec is almost where the timing marks are btw, i cant remember but its about .56mm @ tdc.
and the boost compensator is set to 10% extra fuel .
all calibrations on the pump are correct (checked on calibration machine)
any help or ideas are apreciated.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
help needed with 5lt pump timing
Moderators: toaddog, Elmo, DUDELUX
Who is online
Users browsing this forum: No registered users and 5 guests