Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

big front end shake

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 44
Joined: Thu Mar 04, 2010 8:25 pm
Location: Newcastle

big front end shake

Post by Cambo4sho »

hey guys im having trouble with my gu. I put 35s on it and when the truck reaches 50-60 kph it shakes crazy. Can any one pleese help
Posts: 102
Joined: Fri May 11, 2007 12:44 pm
Location: Brisbane

Re: big front end shake

Post by moddedgu »

Cambo4sho wrote:hey guys im having trouble with my gu. I put 35s on it and when the truck reaches 50-60 kph it shakes crazy. Can any one pleese help
Will need some more info, like lift, suspension setup, panhards, radius arms what sort, tyres and rims balanced? ETC

David
Nissan Patrol GU, Wagon
Posts: 470
Joined: Wed Jan 24, 2007 12:21 pm
Location: Australia

Re: big front end shake

Post by 351ciofgrunt »

A patrol with a shake? I'm sure i've seen this covered before...

Try doing a search

But it will be things like wheel balance, wheel bearings, any of your suspension bushes, loose body lift bolts.
GQ Patrol Wagon, 6 point roll cage
351 cleveland, CHI heads, solid cam, Funnelweb single plane, 750 HP DP
Posts: 78
Joined: Tue Apr 06, 2010 2:16 pm
Location: sydney

Re: big front end shake

Post by forkcy »

after maket steering dampner would probable help alot if you dont have one
Banned
Posts: 149
Joined: Mon Dec 27, 2010 9:16 pm
Location: NUNYA

Re: big front end shake

Post by OUTLAW565 »

I was getting 3 or so weeks out of genuine panhard rod bush's until they would flog out. And then my truck would start to wobble real bad. Here's what the boy's at Buds Customs did for me just last night.

Image
GQ ute build.
http://www.outerlimits4x4.com/viewtopic ... 8#p2012998" onclick="window.open(this.href);return false;
Posts: 411
Joined: Tue Feb 24, 2009 11:00 am
Location: Katherine N.T

Re: big front end shake

Post by gu town »

forkcy wrote:after maket steering dampner would probable help alot if you dont have one

I'm sure i've seen this as an answer before..... :?



I'm sure i've seen the following as a response before.....

a steering dampner will just mask the problem. if at all...

9 times out of 10 it will be your panhard bushes. replace only with genuine rubber ones.

wheel bearings, king pins, tie rod ends, wheel balance and wheel alignment will also play a part.

as mentioned it's been covered many times before.
GU td42 ute with go fast bits and go futher bits
Posts: 696
Joined: Mon Jan 10, 2005 7:07 pm
Location: Greenbank

Re: big front end shake

Post by zookimal »

x2
If the panhard bushes are good, everything else is within spec and the castor is right, then it shouldn't need a steering dampner at all.

An early post of yours says 5in lift. What castor correction are you running?

If it's only under power at certain speeds then check uni joints. If it's only since the 35s went on then rotate the tyres front to back and try again.
-Mal

Zook 1, 2, 3 gone
Patrol - Wheels, engine and stuff
Posts: 1
Joined: Mon Mar 15, 2010 3:34 pm
Location: West Gippy

Re: big front end shake

Post by MichaelBridgman »

I've had exactly the same thing, some research and a visit to action 4x4 warragul told me you'll need to put in a set of adjustable pan hard rods, as the original ones will keep destroying bushes when its been raised/big tyres.
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest