Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
40 series door aliginment
Moderators: toaddog, Elmo, DUDELUX
40 series door aliginment
having trouble with getting the door seals mating to windscreen panel its close enough at the bottom but at the top its to far away. any tips would be appreciated thanks
Gday Brian!
Re: 40 series door aliginment
wind window down put knee against door and pull on top of window frame
cheers
Gordon
cheers
Gordon
Re: 40 series door aliginment
its not the door thats the problem..... its like the roof is to far forward and is holding the windscreen panel to far forward but i cant move it back with bolt adjusments was thinken of trying to bend/pull the hole roof back 1/2 an inch or so?
Gday Brian!
Re: 40 series door aliginment
If it's an after market roof whoever fit it might have drilled the holes to far toward the front of the roof. I have fit a fibreglass roof before that had no pre drilled holes.
Who is online
Users browsing this forum: No registered users and 73 guests