I have most of the bender pieces. Still waiting for dies to be machined (cost $560). I won't get much change out of $1000 by the time I finish but that's okay.
Not much tech for now. Just pics of some of the parts.
Firstly, the plates that form the main arms.
Secondly, the spigot for breaker bar.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Rorty Bender Build Thread
Moderators: toaddog, TWISTY, V8Patrol, Moderators
Rorty Bender Build Thread
Last edited by N*A*M on Wed Apr 07, 2004 7:52 pm, edited 1 time in total.
daryl
the dies will be made from D2 tool steel
http://www.timken.com/products/specialt ... lympic.htm
yes, CNC'd
correct, rorty model 2 bender. it is very beefy!
pipe is not dimensionally accurate hence the reason this would not work well with it. this should have no issues bending 0.120 wall tube.
strange you mention that cos bob was pretty prompt with his replies to me. maybe he's on holidays?
the dies will be made from D2 tool steel
http://www.timken.com/products/specialt ... lympic.htm
yes, CNC'd
correct, rorty model 2 bender. it is very beefy!
pipe is not dimensionally accurate hence the reason this would not work well with it. this should have no issues bending 0.120 wall tube.
strange you mention that cos bob was pretty prompt with his replies to me. maybe he's on holidays?
Last edited by N*A*M on Thu Apr 08, 2004 6:45 pm, edited 1 time in total.
derangedrover wrote:NAM,
Is that all the dies for $560?
If possible could you get a price for a complete second set. If its cheaper now thats he's programmed I might be interested in splitting the difference with you if you could do the footwork/freight thing.
Cheers
Daryl
unfortunately that is $560 for a set of 1.5" structural tube dies
it can get very expensive as you can see
you would save about $150 by going mild steel instead of d2
if i were you, i would "borrow" a jd2 bender and have a shop make you one just like it so that you can also use jd2 dies
pm if you still wanna get a copy, but maybe wait till i finish first - in case it doesn't work!
N*A*M wrote:derangedrover wrote:NAM,
Is that all the dies for $560?
If possible could you get a price for a complete second set. If its cheaper now thats he's programmed I might be interested in splitting the difference with you if you could do the footwork/freight thing.
Cheers
Daryl
unfortunately that is $560 for a set of 1.5" structural tube dies
it can get very expensive as you can see
you would save about $150 by going mild steel instead of d2
if i were you, i would "borrow" a jd2 bender and have a shop make you one just like it so that you can also use jd2 dies
pm if you still wanna get a copy, but maybe wait till i finish first - in case it doesn't work!
why do you have to go D2 instead of mild steel?
from link above:
D2 tool steel is a versatile high-carbon, high-chromium, air-hardening tool steel that is characterized by a relatively high attainable hardness and numerous, large, chromium-rich alloy carbides in the microstructure. These carbides provide good resistance to wear from sliding contact with other metals and abrasive materials. Although other steels with improved toughness or improved wear resistance are available, D2 provides an effective combination of wear resistance and toughness, tool performance, price, and a wide variety of product forms.
i didn't want to spend $$$ having the dies machined only to have them open up with use. since it's a big money project, i might as well do it right.
D2 tool steel is a versatile high-carbon, high-chromium, air-hardening tool steel that is characterized by a relatively high attainable hardness and numerous, large, chromium-rich alloy carbides in the microstructure. These carbides provide good resistance to wear from sliding contact with other metals and abrasive materials. Although other steels with improved toughness or improved wear resistance are available, D2 provides an effective combination of wear resistance and toughness, tool performance, price, and a wide variety of product forms.
i didn't want to spend $$$ having the dies machined only to have them open up with use. since it's a big money project, i might as well do it right.
Who is online
Users browsing this forum: No registered users and 3 guests