I currently have an 89 sr5 4runner with a 22r. I am in the process of putting a 3rz in it.
I bolted up the 3rz Bellhousing and the input shaft seems to be too short.
I took some measurements and the 3rz belhousing is about 10mm longer.
Has anyone else had this?
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
3rz Bellhousing
Moderators: toaddog, Elmo, DUDELUX
Re: 3rz Bellhousing
It's a common problem as far as I know. You need to get a different belhousing off a hiace I think.
Rims flipped from $50
Who is online
Users browsing this forum: No registered users and 0 guests