its not friction cause i`ve changed the pads theres no scoring or scratches on the disc,what else could it be 
My trucks an 85 4runner.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Grinding noise when brakes applied.
Moderators: toaddog, TWISTY, V8Patrol, Moderators
Grinding noise when brakes applied.
I`ve got a grinding when I use the front brakes on one side only when the hubs are locked in its not friction cause i`ve changed the pads theres no scoring or scratches on the disc,what else could it be
My trucks an 85 4runner.
its not friction cause i`ve changed the pads theres no scoring or scratches on the disc,what else could it be
My trucks an 85 4runner.
[url=http://downunder4x4.net/forum/showthread.php?t=1650]86 Hilux[/url]
and a 84 extra cab
If Rocks Had P^ssies Our Lives Would Be Perfect :D...
and a 84 extra cab
If Rocks Had P^ssies Our Lives Would Be Perfect :D...
I would go with bearings too...but word of caution dont drive it anymore than you have to...the damage that can be done to the shaft if the bearing collapses is mucho $$$$$.
I recently drove my 100 series LC out the gate from work and noticed a rumble as you did. I had to drive about 100mtrs before I could turn and return to work. Next day I rang for an 'all up lift' and took the 4by to get the bearing replaced. I was lucky no damage done to shaft but if I had driven home and then driven to garage next day I would definitely have done the shft considerable damage.
I recently drove my 100 series LC out the gate from work and noticed a rumble as you did. I had to drive about 100mtrs before I could turn and return to work. Next day I rang for an 'all up lift' and took the 4by to get the bearing replaced. I was lucky no damage done to shaft but if I had driven home and then driven to garage next day I would definitely have done the shft considerable damage.
Nissan Patrol GU3
I think the bearing is on its way I have movement up and down but not across and it only grinds under load, but it just got past Rego 
stoked so now more work to be done
stoked so now more work to be done
[url=http://downunder4x4.net/forum/showthread.php?t=1650]86 Hilux[/url]
and a 84 extra cab
If Rocks Had P^ssies Our Lives Would Be Perfect :D...
and a 84 extra cab
If Rocks Had P^ssies Our Lives Would Be Perfect :D...
Who is online
Users browsing this forum: No registered users and 4 guests