hey guys,
just a quick one, i have a 45 series with disc brakes up front and drums on the rear, i currently building mine and am ready to purchase the parts for my brakes.
now i have the twin cylinder on the rear and from what i hear using these, will lock up the rear of the truck very quickly. to overcome this i was going to put the smalle bore brake cylinders in. does anyone know what model the smaller bore brake cylinders came out in??? if tried repco and the like but they only have part numbers,
cheers guys,
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
45 brake cylinders
Moderators: toaddog, Elmo, DUDELUX
45 brake cylinders
" You can't fix it if you don't break it "
Re: 45 brake cylinders
You can use the entire drum/backing plates from a 60 or 75 which will also convert the handbrake to the rear drums.
Who is online
Users browsing this forum: No registered users and 0 guests