Gti wiring

[zukitrev]

G'day all, been wiring up gti engine in sierra,have got the wiring diagram of this site but it's for US model and I 'm not sure about the two wires for the air bypass (if thats what you call it) it has a big adjustment screw on it and i guess it mounts to the firewall, and hoses run to inlet manifold.It has a red and a yellow wire going to it. I can get the engine to start but dies after about 2 seconds, think it''s something to do with this. It's a bit like when the idle soleniod is not working on a carby model. So this is what I have worked out so far.
From the big round plug, 8 wires ,blue- to thermo fan,brown/ yellow- ign module, black-earth, purple/green-diagnostics plug,pink/white-fuel pump relay, white/black ??????, black/white- ignition,white/blue-ignition. Green rectangle plug, 11 wires, brown- ecu ignition, white/red- alt warning light, blue/red A/c coupler????,yellow/white- temp ,Yellow- this i think goes to the air bypass,need to know what to connect to,red- same as prev, white - constant 12 volts, black/yellow-starter,Violet/yellow- diagnostics, violet- warning light ecu fault.
So theres a couple unknown with ????, the red and yellow for the air , and any thing else there tha looks not right thanks

[mnemonix]

On the firewall would probably be the air con idle up, so not related to your issue.

[V.W.Dave]

Pm jumbo jones he just did this and knows a few tricks with the dizy problem

[zukitrev]

Can't find jumbo jones to pm

[mnemonix]

Jimbo Jones: http://www.outerlimits4x4.com/ucp.php?i ... se&u=11697" onclick="window.open(this.href);return false;

[zukitrev]

Ok Jimbo had an auto electrician do his , and I have an auto elec brother doing mine from a distance, but if anyone else has an idea would much appreciate, save me fully stripping back harness/ time

[jimbo jones]

some info here

http://auszookers.com/index.php?name=Ne ... cle&sid=41" onclick="window.open(this.href);return false;

and here

http://auszookers.com/index.php?name=Ne ... cle&sid=32" onclick="window.open(this.href);return false;

[zukitrev]

Still no luck, seems to be dropping power to injectors after it starts, from the c3 c4 wires on the computer. Have tried 3 computers and all the same, please help any idea's