Hey lads, just wondering what the normal backlash is for a gq rear diff??
forgot to measure what it was when we pulled it out... Its got a air locker too so dont know if that changes anything...
Cheers Hally
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Rear diff backlash setting??
Rear diff backlash setting??
comp tj
dailly jk
and a can do attitude!!!!
dailly jk
and a can do attitude!!!!
Re: Rear diff backlash setting??
Fitment of an air locker doesn't affect your backlash setting.
Backlash between the crown wheel and pinion is setup the same regardless of carrier used.
I think the Nissan manual says between 0.15 and 0.20mm.
Someone else might be able to find the exact quote from the manual.
Backlash between the crown wheel and pinion is setup the same regardless of carrier used.
I think the Nissan manual says between 0.15 and 0.20mm.
Someone else might be able to find the exact quote from the manual.
2001 GU Patrol DX wagon, TD42, Air Lockers, twin spare carrier, Barrett HF, 35" Treps, high pinion rear, Staun beadlocks, 60l Engel and more!
Re: Rear diff backlash setting??
I'd be aiming more towards 0.15 (6 thou) with gears that have already been used and run in.A.J. wrote:Fitment of an air locker doesn't affect your backlash setting.
Backlash between the crown wheel and pinion is setup the same regardless of carrier used.
I think the Nissan manual says between 0.15 and 0.20mm.
Someone else might be able to find the exact quote from the manual.
Who is online
Users browsing this forum: No registered users and 57 guests