Anyhow, what's the best course of action?
I figure I should drop the oil pan and see what's in there. Assuming a bearing has gone, then presume it's best to pull the engine out and put a 2nd one in? No one bothers repairing this sort of thing right?
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Rod knock in my 3.5?
Moderator: -Scott-
Rod knock in my 3.5?
After a solid mud-slinging session, seems like my 3.5 V6 has developed what sounds like a bit of rod knock. Well, that's what it sounds like to me. I guess I'll get a professional ear to it, see what they think. A main bearing perhaps? Or could it be in the top of the engine? Doesn't sound like lifters.
Anyhow, what's the best course of action?
I figure I should drop the oil pan and see what's in there. Assuming a bearing has gone, then presume it's best to pull the engine out and put a 2nd one in? No one bothers repairing this sort of thing right?
Anyhow, what's the best course of action?
I figure I should drop the oil pan and see what's in there. Assuming a bearing has gone, then presume it's best to pull the engine out and put a 2nd one in? No one bothers repairing this sort of thing right?
94 NJ SWB, 3.5 V6, Auto, susp+body lift, 33x12.6 Maxxis Bighorns, AISIN hubs, ARB bar + tigerz11 2-speed winch, sliders, ARB and factory lockers.
Re: Rod knock in my 3.5?
Fix the devil you know was going to be my theory. What are the chances of getting a good low KM 3.5 DOHC second hand these days?
1994 NJ SWB, 3.5, 5 speed manual, 33's, XD9000, 4.9 diffs, Front & Rear ARB's, Safari Snorkel
2008-2009-2010-2011 Pavlova in the shed.
2008-2009-2010-2011 Pavlova in the shed.
Re: Rod knock in my 3.5?
True...
I suppose I should find out what's really wrong with it first.
I suppose I should find out what's really wrong with it first.
94 NJ SWB, 3.5 V6, Auto, susp+body lift, 33x12.6 Maxxis Bighorns, AISIN hubs, ARB bar + tigerz11 2-speed winch, sliders, ARB and factory lockers.
Who is online
Users browsing this forum: No registered users and 29 guests