am/fm arieal.

Post by **Macca177** » Mon Apr 12, 2004 11:22 am

just your regular am/fm arieal ( i hate not listin to the radio on the way to work) and wires...it house the rubber mounting where that goes my wire got snagged and pulled out.
if i strip them back, there is 1 single wire down the center and alot more round the insulated center then the normal insultaion roudn outside.
which goes back on to where?

the outised is fm i gussin? just solder that on ?

the attached pic is the mount
and the wire

sorry if this is just a silly question

Post by **ozy1** » Mon Apr 12, 2004 11:30 am

i think you may find, the outside wiring, is a sheath, acts like an earth to stop shittysignal, like engine noise, and the single wire is actually the one that picks up signal, its just a guess thou.......

Post by **Macca177** » Mon Apr 12, 2004 11:50 am

arhhh okay ... but is that where they are ment to connect up to ?

Post by **ozy1** » Mon Apr 12, 2004 12:06 pm

not actually sure on how they connect to that style of arieal, sorry bout that, might be wise to do a search online

Post by **landy_man** » Mon Apr 12, 2004 1:57 pm

that is correct
the braided section gets soldered to the u shaped bracket
the centre wires get soldered to the centre oin

Post by **Macca177** » Mon Apr 12, 2004 2:17 pm

thanks

Outer Limits 4x4 Board

am/fm arieal.

am/fm arieal.

Who is online