Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

TH350 or TH400

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
Posts: 675
Joined: Sat Dec 17, 2005 10:06 pm
Location: campbelltown

TH350 or TH400

Post by Nat84 »

hi guys whats a butter auto the TH350 or TH400 and what would be the easiest to get?
Tires are like boobs, they always look big until you have played with them for a while, then you just want a bigger set
Posts: 1715
Joined: Tue Sep 06, 2005 8:38 pm
Location: at my wits end

Re: TH350 or TH400

Post by RED60 »

TH400 is probably a bit tougher in its unmodified form, it is a bit more power hungry, in that more hp is used driving the 400 than the 350... from memory, it's easier to bolt a Toyota transfer (the only one I am familiar with) to the 400 since it has a bolt on extension housing... so you can machine an adapter and bolt it where the original extension housing is....I don't think the TH350 has an unboltable extension housing, so may be more difficult to adapt to a 4wd situation.... I've had a TH400 with minor mods to make it shift more firmly, behind a small block chev in an FJ43, the fitment was not too difficult and was a weapon on the sand......... my thoughts anyway... there would be people on here who know much more about them than me.... :cool:
Show me the money..SHOW ME THE MONEY
Im here for the sausage!
Posts: 15646
Joined: Wed Sep 24, 2003 7:11 pm
Location: NEWCASTLE

Re: TH350 or TH400

Post by DIRTY ROCK STAR »

TH350 is slightly smaller.
TH400 is a bigger beast.

TH400 should take more abuse but depends what you are running etc.

Th350 is easier to find in my experience. i paid $300 i think for a Th400. it needed a rebuild after a while though and never stops leaking.

if you are serious the guys at wyong autos are the gurus.

i will be going there if i need anymore gbox work done.
EVERYONE LOVES A 40
www.lovells.com.au
RAW4x4
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest