Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

moving gearbox crossmember

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 103
Joined: Thu Feb 07, 2008 1:43 pm
Location: MELBOURNE

moving gearbox crossmember

Post by ANDREWGQ 351 »

i have a gq wagon with a 454 that uses its share of fuel.
I was thinking that if i could move the chassis crossmember that is behind the gearbox forward then i could get a third gas tank under, at the moment there is only 780mm in length and thats a small tank

My question is has anyone done this and are there any issues.
Posts: 810
Joined: Thu Jul 15, 2004 8:02 am
Location: Somewhere in NSW

Re: moving gearbox crossmember

Post by brighty »

Anything can be done champ, though your best bet would be to go see an engineer first..... especially as it'll be modifying the chassis!! I'd probably go see the engineer that certified the 454 conversion first as he should have details of all the mods for your car on file.... and then take it from there.
When in doubt..... UTE-ERIZE it!!!
Post Reply

Who is online

Users browsing this forum: No registered users and 39 guests