Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

cruiser high pinion

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
User avatar
shortyq
Im here for the sausage!
Posts: 462
Joined: Tue Jul 21, 2009 1:25 pm
Location: next to a big hole in the ground

cruiser high pinion

Post by shortyq »

converting std housings to h/p by way of rotating the pumpkin rear section!
question being,by fliping the centre 180'' causes the rotation to run in reverse!
is it a matter of switching centres front to rear and vise versa?
or am i missing something?
mmmm SAUSAGE
Top
Posts: 1768
Joined: Sun Mar 14, 2004 11:51 am
Location: Weipa

Re: cruiser high pinion

Post by crankycruiser »

im confused?

STD housings? out of what?

which end of the car u planning on putting the HP in?
80 xtra cab
Supercharged LS1, Locked n shit

80 Wagon, TD Tourer, locked, Interco 35s, G turbo
Top
User avatar
shortyq
Im here for the sausage!
Posts: 462
Joined: Tue Jul 21, 2009 1:25 pm
Location: next to a big hole in the ground

Re: cruiser high pinion

Post by shortyq »

yeah sorry!
75 seies both front and rear!
its actually a hilux 2wd sitting on cruiser axels SOA
mmmm SAUSAGE
Top
Posts: 1109
Joined: Mon Feb 12, 2007 8:48 pm
Location: Australia

Re: cruiser high pinion

Post by hulsty »

Both front and rear diffs are exactlu the same.
The Silver Bullet - BJ74
Where the actions at Ontrack 4wd Club
http://www.ontrack4wdclub.com/
[url]http://www.cams.com.au/[/url]
Top
Posts: 441
Joined: Fri Feb 06, 2009 6:47 am
Location: jimboomba

Re: cruiser high pinion

Post by 84sloth »

nah bloke a mate of myne tried doing this ended up welding up the lot neat as and it went in reverse :lol: wouldnt bother. you would have to get reverse cut gears for the landcruiser 9.5' centres. and for that price you would be better getting high pinion dana 60's
My hj47-80series build
[code]http://www.outerlimits4x4.com/viewtopic.php?f=16&t=208404[/code]
Top
User avatar
shortyq
Im here for the sausage!
Posts: 462
Joined: Tue Jul 21, 2009 1:25 pm
Location: next to a big hole in the ground

Re: cruiser high pinion

Post by shortyq »

yes thats what im asking!
who does the 9.5 reverse cut?
any links?
mmmm SAUSAGE
Top
Posts: 1109
Joined: Mon Feb 12, 2007 8:48 pm
Location: Australia

Re: cruiser high pinion

Post by hulsty »

shortyq wrote:yes thats what im asking!
who does the 9.5 reverse cut?
any links?

NO one. Convert to Ford 9" they can be had reverse cut
The Silver Bullet - BJ74
Where the actions at Ontrack 4wd Club
http://www.ontrack4wdclub.com/
[url]http://www.cams.com.au/[/url]
Top
Posts: 5179
Joined: Fri Dec 05, 2003 8:15 pm
Location: Brisbane Australia

Re: cruiser high pinion

Post by Shadow »

just flip it over :finger: :finger:

low pinion :D:D
03 HDJ100R GXL / 94 FJ45-80
Top
Posts: 1231
Joined: Sun May 15, 2005 1:00 pm
Location: Bayside, Brisbane

Re: cruiser high pinion

Post by Mr DJ »

If your really keen on HP front, find a late 75 series cruiser and throw that front diff & drive shaft under there, will be 8" tho same as 80 front.
91' Hilux Surf with the usual mods & a few different ones ....
Coil SAS by www.budscustoms.com.au
Top
Posts: 5179
Joined: Fri Dec 05, 2003 8:15 pm
Location: Brisbane Australia

Re: cruiser high pinion

Post by Shadow »

Mr DJ wrote:If your really keen on HP front, find a late 75 series cruiser and throw that front diff & drive shaft under there, will be 8" tho same as 80 front.
he wants HP rear
03 HDJ100R GXL / 94 FJ45-80
Top
Posts: 1768
Joined: Sun Mar 14, 2004 11:51 am
Location: Weipa

Re: cruiser high pinion

Post by crankycruiser »

off topic.............


but why have u sprung over a 2wd???!!!??
80 xtra cab
Supercharged LS1, Locked n shit

80 Wagon, TD Tourer, locked, Interco 35s, G turbo
Top
Posts: 5179
Joined: Fri Dec 05, 2003 8:15 pm
Location: Brisbane Australia

Re: cruiser high pinion

Post by Shadow »

crankycruiser wrote:off topic.............


but why have u sprung over a 2wd???!!!??
sounds like hes making a 2wd 4wd
03 HDJ100R GXL / 94 FJ45-80
Top
User avatar
shortyq
Im here for the sausage!
Posts: 462
Joined: Tue Jul 21, 2009 1:25 pm
Location: next to a big hole in the ground

Re: cruiser high pinion

Post by shortyq »

crankycruiser wrote:off topic.............

but why have u sprung over a 2wd???!!!??
302 windsor,cruiser running gear,swb,,tube rear on 33s all for under 3k,thats why,no its not a daily!
so it appears there is no h/p gear sets for the 9.5
8.0 yes so that should fix the problem!
anyway cheers for those who tried!
Last edited by shortyq on Wed Jun 29, 2011 11:06 am, edited 1 time in total.
mmmm SAUSAGE
Top
User avatar
shortyq
Im here for the sausage!
Posts: 462
Joined: Tue Jul 21, 2009 1:25 pm
Location: next to a big hole in the ground

Re: cruiser high pinion

Post by shortyq »

Barnsey wrote:ShortyIQ LOLS :rofl:
you can lols all you like,bansey!
stick to chit chat all your good for!
mmmm SAUSAGE
Top
Posts: 443
Joined: Tue Dec 25, 2007 6:03 pm
Location: Tasmania, Australia

Re: cruiser high pinion

Post by vk7ybi »

http://www.youtube.com/watch?v=yF8XRgDKqIc" onclick="window.open(this.href);return false;

Left is an upside down hilux centre, right is a bundera high pinion.
Top
User avatar
shortyq
Im here for the sausage!
Posts: 462
Joined: Tue Jul 21, 2009 1:25 pm
Location: next to a big hole in the ground

Re: cruiser high pinion

Post by shortyq »

vk7ybi wrote:http://www.youtube.com/watch?v=yF8XRgDKqIc

Left is an upside down hilux centre, right is a bundera high pinion.
well i say thankya sir!
thankya very much!
mmmm SAUSAGE
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 3 guests