hi all need to pick your brains lol, have a mate with a 81' HJ60 sahara thats wanting to replace the round headlights with the better looking HJ61/62 twin square headlights, now is this just a straight swap over? ( like ya would on a old kingswoods with the walk off nose clips ) of is there more involved, im aware the wiring for the lights would require some alteration ( but i can knock that up in 10 min ), thinking about doing the same to my 60 when it arrives to,
anyone got any ideas?
cheers all, Pete
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
60 series front end change
Moderators: toaddog, Elmo, DUDELUX
Re: 60 series front end change
g.day mate u will need a ras support grille and corner lights and head light covers thats about all apart from wirin up lights
Re: 60 series front end change
but does require cut and welding i believe?
03 HDJ100R GXL / 94 FJ45-80
Re: 60 series front end change
yeh thats what im not sure about shadow
Re: 60 series front end change
hi guys i know this a late reply but i have done a full 1988 sahara swap into a 1983 fj60
i swapped everything full wiring loom dash all 3 rows of seats and the fridge center console plus the headlights n front ,electric windows ........
now for the front end you realy need from the doors forward but you can get around the front guards they do fit but you have no side blinkers if you have some in your bullbar then no problem .
you will have to stripp the front end of in cludng mud gaurds weather you are changing them or not so you can get the radiator support panel of once you have your new twin headlight rad support panel in place refit mudgaurd radiator n all the other bits bonnets are the same but the panel that runs under the grill is different
as it holds the blinkers no cutting or welding required at all
the seats a whole different problem
i swapped everything full wiring loom dash all 3 rows of seats and the fridge center console plus the headlights n front ,electric windows ........
now for the front end you realy need from the doors forward but you can get around the front guards they do fit but you have no side blinkers if you have some in your bullbar then no problem .
you will have to stripp the front end of in cludng mud gaurds weather you are changing them or not so you can get the radiator support panel of once you have your new twin headlight rad support panel in place refit mudgaurd radiator n all the other bits bonnets are the same but the panel that runs under the grill is different
as it holds the blinkers no cutting or welding required at all
the seats a whole different problem
1982 fj 60 with all late model gxl stuff 3 inches of lift ,snorkel ,lokker,bullbar,winch,ford 5 liter and a meggasquirt ECU
Who is online
Users browsing this forum: No registered users and 101 guests