Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Cheapest way to 32" tyre a Lux
Moderators: toaddog, Elmo, DUDELUX
Cheapest way to 32" tyre a Lux
Hey Guys,
I'm wanting to get some more under diff clearance and other great off road attributes by using larger tyres,
The only problem is do$h , is there a cheap solution for clearing some 32's.....like basic guard trimming etc. on a LN106
Or do I need to stuff around with torque arm lengths or x over steer??? The thing currently runs 31's with very minor scrubbing.
Thanks guys.
Dano.
I'm wanting to get some more under diff clearance and other great off road attributes by using larger tyres,
The only problem is do$h , is there a cheap solution for clearing some 32's.....like basic guard trimming etc. on a LN106
Or do I need to stuff around with torque arm lengths or x over steer??? The thing currently runs 31's with very minor scrubbing.
Thanks guys.
Dano.
Re: Cheapest way to 32" tyre a Lux
32s should fit on standard suspension dude. If yours has sagged that much perhaps look at new springs or longer shackles.
Locktup4x4.com.au - For all of your hardcore gear
Outlaws4x4.com
Outlaws4x4.com
Re: Cheapest way to 32" tyre a Lux
You're only dealing with an extra half inch of rubber. It won't scrub too much more than now. Bigger offset rims might help, depending on where it scrubs.
Bambrick Media - www.bambrickmedia.com.au
Redlands 4WD Centre - www.redlands4wd.com.au
Swan's Water & Tipper Hire - 0414 628 011
Redlands 4WD Centre - www.redlands4wd.com.au
Swan's Water & Tipper Hire - 0414 628 011
Re: Cheapest way to 32" tyre a Lux
Hey Guys,
Thanks for the replies, the truck has a 2-2.5 inch lift so height is no probs,
I'm worried about damaging the rear of the front guard whilst flexing, I believe this model
has an issue compared with earlier models. I think the normal fix is to move front diff and
modify steering setup ($$$)
Cheers, Dano.
Thanks for the replies, the truck has a 2-2.5 inch lift so height is no probs,
I'm worried about damaging the rear of the front guard whilst flexing, I believe this model
has an issue compared with earlier models. I think the normal fix is to move front diff and
modify steering setup ($$$)
Cheers, Dano.
Re: Cheapest way to 32" tyre a Lux
Chop the guards or change your signature to: UN-AFFORDABLE MOWING & MAINTENANCE and do it properly
Re: Cheapest way to 32" tyre a Lux
LOL.....everyones a smart arse,
Off season at the moment...you know the grass don't grow in winter LOL
Guard chop it'll probably be.....
Cheers, Dan.
Off season at the moment...you know the grass don't grow in winter LOL
Guard chop it'll probably be.....
Cheers, Dan.
Re: Cheapest way to 32" tyre a Lux
2" cab lift. Depending where u work make the blocks on a lathe and bolts are cheap as
Re: Cheapest way to 32" tyre a Lux
Thats a point, guys.
I'd prefer to keep the "rollux" as low as possible though.
I reckon I'll just chop chop the guards.
Cheers, Dano.
I'd prefer to keep the "rollux" as low as possible though.
I reckon I'll just chop chop the guards.
Cheers, Dano.
Re: Cheapest way to 32" tyre a Lux
I got 33s fitting under my LN 65 all I had to do was hammer the join it the body. Just near the mud flaps. I got 2" shackles now and fit 35s . Without scrubbing
93 duel cab lux. 2.8 TD twin locked. Big tyres, little lift. Wide stance. Barwork and build up under way
Re: Cheapest way to 32" tyre a Lux
I have 32" tyres on an LN106 that has sagged 2" lifted leaf springs. The tyres do catch on the plastic inner with minimal flex (ie driving up a driveway) but only just.
Hammering the guard 5-10mm would probably clear it. I have just got some 2" extended shackles and will eventually get some new leaves. The shackles only give a very minimal lift effect as I understand it but that would probably be enough - I'll know by next week I guess.
Hammering the guard 5-10mm would probably clear it. I have just got some 2" extended shackles and will eventually get some new leaves. The shackles only give a very minimal lift effect as I understand it but that would probably be enough - I'll know by next week I guess.
Re: Cheapest way to 32" tyre a Lux
Thanks for the reply guys much appreciated.
Dano.
Dano.
Who is online
Users browsing this forum: No registered users and 8 guests