Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

2H EXHAUST MANIFOLD STUD/BOLT

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 314
Joined: Thu Aug 16, 2007 6:29 pm
Location: RANDWICK

2H EXHAUST MANIFOLD STUD/BOLT

Post by teambullet »

Gday all, wondering if anyone out there who may be able to get me a measurement of a 2h exhaust manifold stud, got a turbo manifold to bolt up and would like to know how long the studs come out off the head.. Toyota dont have one in stock and dont want to order 12 and then there short....
Thanks guys..
Denny
R.I.P SILVER BULLET.
TOW RIG D4D 2011 LUX ON 33s. COMP RIG 95 SIGLE CAB LUX
SPONSORS EASTCOAST 4WD EASTSIDE AUTO KAR PRO TYRE AND AUTO
TECH ENGINEERING
Top
Posts: 21
Joined: Tue Jan 04, 2011 9:23 pm
Location: Central tablelands NSW

Re: 2H EXHAUST MANIFOLD STUD/BOLT

Post by mrfras »

Hi Teambolt,
I think U will find them to be the same size exh studs for a 2H or 12HT I just put new studs in an 80 series & toyota just ordered in for me no questions ask.
I have a 12HT & 2H down the back so will measure for U tomorrow

Fras
Last edited by mrfras on Tue Jul 05, 2011 5:46 pm, edited 1 time in total.
Top
Posts: 314
Joined: Thu Aug 16, 2007 6:29 pm
Location: RANDWICK

Re: 2H EXHAUST MANIFOLD STUD/BOLT

Post by teambullet »

Thank you Fras
R.I.P SILVER BULLET.
TOW RIG D4D 2011 LUX ON 33s. COMP RIG 95 SIGLE CAB LUX
SPONSORS EASTCOAST 4WD EASTSIDE AUTO KAR PRO TYRE AND AUTO
TECH ENGINEERING
Top
Posts: 21
Joined: Tue Jan 04, 2011 9:23 pm
Location: Central tablelands NSW

Re: 2H EXHAUST MANIFOLD STUD/BOLT

Post by mrfras »

Hello Teambullet,
Sorry about that forgot to do this morning checked a little while ago yes both 2H & 12HT exhaust studs are the same the threads protude about 38mm out of head & are 8mm in dia x 1.25 thread pitch.

Hope it helps
Fras
Top
Posts: 314
Joined: Thu Aug 16, 2007 6:29 pm
Location: RANDWICK

Re: 2H EXHAUST MANIFOLD STUD/BOLT

Post by teambullet »

Thank you Fras, very helpful.
Denny
R.I.P SILVER BULLET.
TOW RIG D4D 2011 LUX ON 33s. COMP RIG 95 SIGLE CAB LUX
SPONSORS EASTCOAST 4WD EASTSIDE AUTO KAR PRO TYRE AND AUTO
TECH ENGINEERING
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 42 guests