Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Tachometer Probblem

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 3
Joined: Fri Jun 25, 2010 2:30 pm

Tachometer Probblem

Post by gilge »

I have made an engine swap from a3 ltr. to a 4,2 liter diesel and have used the harnes from the 3 ltr. Now i have a problem whit the tachometer necause the 3ltr. works on a different current settup and nobody seams to be abel to retune the tacho. Has anybody has made such a conversion and had the same probblem? how did you fix it?
I would apreciate any information on this subject.
Cheers Gilge :x-mas:
Posts: 28
Joined: Tue Dec 21, 2010 9:31 pm

Re: Tachometer Probblem

Post by andy86 »

What year patrol are you working with?
up to 99 the tachometer in the cluster is the same part number from td42 to z30.
Posts: 166
Joined: Mon Jan 07, 2008 9:34 pm
Location: Maitland

Re: Tachometer Probblem

Post by dave_str »

The ZD30 was first introduced in 2000.

I think your refering to the RD28ETI.
2006 STR Navara with lots of goodies, just need a V6 front diff and a locker.
Posts: 28
Joined: Tue Dec 21, 2010 9:31 pm

Re: Tachometer Probblem

Post by andy86 »

Yes you are right that ZD30 only came out in 00,
The RD28t as it is the same as a TB45de one and different to the TD engines.
Here is the exact listing for the Tacho assy in the cluster for Aus delivered patrol wagons.
I Reckon your problem will be in the wiring harness, check the wiring diagram for un required resistors maybe?
Image
Posts: 286
Joined: Tue May 11, 2004 8:48 pm
Location: Toowoomba

Re: Tachometer Probblem

Post by patrol man »

I rewired mine, 2.8 to 4.2, 3.0 will be the same . It wasn't that hard when I studied the wiring diagram.

you will need to find the two pins in the back of the dash and wire in the wires from the 4.2 taco sensor.
I removed my ecu and most of the engine loom, then made my own to suit.
trouble you will be having is the ecu runs the 3.0l taco whereas the 4.2 is run direct.
I have some more info here somewhere. I'll have a look. cheers
Living the dream on the hill that floods
Post Reply

Who is online

Users browsing this forum: No registered users and 138 guests