Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Seating in 93 cab/ chassis

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 35
Joined: Sat Nov 13, 2010 11:23 am

Seating in 93 cab/ chassis

Post by cruise75 »

The seats in my ute have finally lost the cushioning. Before I pay to re upholster them I was wondering if there is another seat combo that would fit. Some say commodore seats bolt in but was after more positive advice. Cheers
Top
Posts: 137
Joined: Tue Jun 03, 2008 6:18 pm
Location: Sydney, Australia

Re: Seating in 93 cab/ chassis

Post by McLarryBob »

I think one of the recent 4wd Action mags did an article on this.
Top
Posts: 454
Joined: Mon Nov 06, 2006 5:05 pm
Location: campbelltown sydney

Re: Seating in 93 cab/ chassis

Post by coopster »

just get surf seat that what im doing
hilux dualcab white
Top
Posts: 35
Joined: Sat Nov 13, 2010 11:23 am

Re: Seating in 93 cab/ chassis

Post by cruise75 »

do the surf seats have the sme bolt holes or need to drill new ones ?
Top
Posts: 454
Joined: Mon Nov 06, 2006 5:05 pm
Location: campbelltown sydney

Re: Seating in 93 cab/ chassis

Post by coopster »

not sure but most toyota hilux are the same
hilux dualcab white
Top
Posts: 613
Joined: Tue Sep 06, 2005 3:17 pm
Location: Newcastle/Bathurst, NSW

Re: Seating in 93 cab/ chassis

Post by UhhOhh »

yeah they bolt in no worries.
What do we want? TIME TRAVEL! When do we want it? THAT'S IRRELEVANT!
Top
Posts: 117
Joined: Tue May 18, 2010 5:41 pm
Location: Brisbane

Re: Seating in 93 cab/ chassis

Post by ae86levin »

I put a set of Honda Prelude seats (90's model) in my '94 LN106R.
The front mount points bolt straight up. For the rears I cut out the rivets that held the original seat mounts to the rails and bolted them to the Prelude seat rails.
After doing this they bolted in to the factory floor mount points. I've heard that Integra seats also fit like this.
I've been meaning to do a write up with pics for ages - I'll put it up in the Toyota section tonight.
Top
Posts: 35
Joined: Sat Nov 13, 2010 11:23 am

Re: Seating in 93 cab/ chassis

Post by cruise75 »

Thanks guys you have given me a few options to go with. Cheers
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 0 guests